[Farmall] fuel tank sealer

Mike Sloane mikesloane at verizon.net
Sat Jun 30 08:11:58 PDT 2007


Probably the best sealer kits come from Eastwood 
<http://www.eastwoodco.com/jump.jsp?itemID=382&itemType=PRODUCT> and 
from the POR folks <http://www.stoprust.net/home.php?cat=8>

These are complete cleaning kits with etchant, etc.

With a large tank like the Farmall H, etc. you really need to remove the 
tank and clean it thoroughly before sealing, otherwise you won't get 
good adhesion of the sealer (and the loose hunks of sealer will most 
certainly end up plugging the lines).

What I have done is put a couple of 2' lengths of heavy chain inside, 
add about a gallon of soapy water, seal the openings, strap the tank to 
the raised wheel of another tractor and let the whole mess turn slowly 
for about an hour. (See 
<http://public.fotki.com/mikesloane/farmall_140/140_tank_clean1.html> 
for an image.) The reason I use chain instead of a bunch of old nuts and 
bolts or stones is that it is much easier for me to get them out after 
you are done. After you drain and dry the tank completely, then you 
follow the directions on the product for etching the metal and coating 
with sealer. Doing it this way will result in a very long lasting job. 
There are probably other ways of agitating the tank and soapy water, but 
I work alone, and the tractor wheel method is all I have available.

There is another produce called "Kreme", but I understand that it does 
poorly in the presence of modern gasoline formulations and/or gasoline 
with ethanol in it. I don't know that for a fact.

Other places to obtain similar products are local motorcycle shops, J.C. 
Whitney, and probably Valu-Bilt. I have only used the stuff from 
Eastwood, so I cannot comment on any of the others.

Mike

farmallcub at aol.com wrote:
> I have the same problem with three cubs and need the information as well....
> 
> 
> ?David D. Davis
> 
> 
> 
> -----Original Message-----
> From: Slab210 at aol.com
> To: farmall at lists.antique-tractor.com
> Sent: Sat, 30 Jun 2007 10:05 am
> Subject: Re: [Farmall] fuel tank sealer
> 
> 
> 
> I have a gas tank on a 1940 farmall H that needs sealed
> Does anyone have information on a good sealer. tank does not leak
> it is just rusted on inside.
>  
> thanks
>  
> Roger in Ohio
> 



More information about the AT mailing list