[AT] Farmall M grille
George Willer
gwill at gwill.net
Sun Jul 8 12:57:26 PDT 2007
Dean,
Nice story. Well done... An excellent solution to a problem. :-)
George
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com [mailto:at-
> bounces at lists.antique-tractor.com] On Behalf Of Dean Vinson
> Sent: Sunday, July 08, 2007 3:27 PM
> To: 'Antique tractor email discussion group'; 'Farmall/IHC mailing list'
> Subject: [AT] Farmall M grille
>
> Patching the big hole at the bottom of the grille on my 1950 M finally
> made
> it to the top of my to-do list, so I tried my hand at some sheet metal
> work.
> The grille was missing the insert over where the cultivator lever
> attaches,
> but the real problem was that the sheet metal below the insert opening had
> been cut out somewhere along the way. So I needed a patch before I could
> put in a replacement insert.
>
> Like a lot of jobs the hard part was actually getting around to starting.
> Ace Hardware had some pieces of flat steel for a couple of bucks, so I got
> one of them and cut it with a saber saw to about the right shape. Bent it
> by hand, ground down the edges on a bench grinder, then had an auto shop
> weld it onto the grille for me. Some bondo, primer, and paint, and I was
> done. It's not completely accurate but it looks a hundred times better
> than
> before and I'm happy with it.
>
> Pictures at http://www.vinsonfarm.net/suburban_M.html, at the bottom of
> the
> page.
>
> Dean Vinson
> Dayton, Ohio
> www.vinsonfarm.net
>
>
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list