[AT] NH 57 rake-update

[RonMyers at wildblue.net]

Lew,   Try this site to see if it helps.

https://webparts.pvassociates.net/cnh/main.php

Ron


> Ok; pulled that casting off & cleaned it all up; has bearings & seals
> that seem ok; just need the shaft, pulley, & any spacers, collars, etc
> that puts the shaft assembly together.
>
> Lew
>
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Lew Best
> Sent: Monday, July 16, 2007 12:29 PM
> To: 'Antique tractor email discussion group'
> Subject: Re: [AT] NH 57 rake
>
> Thanks Allan
>
> Yeah; that's where the shaft goes in.  I'm sure one end will be the
> pulley; other end will have the PTO shaft attached to it.  So, gotta be
> a pulley, shaft & whatever holds it together, spacers, etc.  Bearings
> look to still be there; I'll go out in a bit & clean things up, etc.
> Just got it unloaded a little bit ago.
>
> Lew
>
>
> -----Original Message-----
>
> I have a parts manual here, I can look up what you need or sell you a
> manual! Those pictures are kind of close - is that where PTO shaft
> enters
> rake box?
> http://www.manuals.us/index.asp?PageAction=ADVSEARCH&Page=1&txtSearchAll
> Words=holland+57+rake&txtSearchExactPhrase=&txtSearchWithOneOfTheWords=&
> txtSearchWithoutTheWords=&lngLookinCategoryID=0&txtSortOrder=1&intResult
> s=25&btnSearch=Search&AdvSearchAction=GOFETCH
>
> Try Wengers at 1 800 451 5240 for used NH parts. They also own my local
> new
> NH dealership. All types of baler/skid loader/ etc on the shelf.
> good luck!
>
> _______________________________________________
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.10.6/902 - Release Date:
> 7/15/2007 2:21 PM
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>