[AT] NH 57 rake-update

[Lew Best]

Ok; pulled that casting off & cleaned it all up; has bearings & seals
that seem ok; just need the shaft, pulley, & any spacers, collars, etc
that puts the shaft assembly together. 

Lew


-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Lew Best
Sent: Monday, July 16, 2007 12:29 PM
To: 'Antique tractor email discussion group'
Subject: Re: [AT] NH 57 rake

Thanks Allan

Yeah; that's where the shaft goes in.  I'm sure one end will be the
pulley; other end will have the PTO shaft attached to it.  So, gotta be
a pulley, shaft & whatever holds it together, spacers, etc.  Bearings
look to still be there; I'll go out in a bit & clean things up, etc.
Just got it unloaded a little bit ago. 

Lew


-----Original Message-----
 
I have a parts manual here, I can look up what you need or sell you a
manual! Those pictures are kind of close - is that where PTO shaft
enters
rake box?
http://www.manuals.us/index.asp?PageAction=ADVSEARCH&Page=1&txtSearchAll
Words=holland+57+rake&txtSearchExactPhrase=&txtSearchWithOneOfTheWords=&
txtSearchWithoutTheWords=&lngLookinCategoryID=0&txtSortOrder=1&intResult
s=25&btnSearch=Search&AdvSearchAction=GOFETCH

Try Wengers at 1 800 451 5240 for used NH parts. They also own my local
new
NH dealership. All types of baler/skid loader/ etc on the shelf.
good luck!

_______________________________________________
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.476 / Virus Database: 269.10.6/902 - Release Date:
7/15/2007 2:21 PM