[AJD] French and Hecht front wheel info needed

[John Boehm]

Duane- Yes that does help identify the HA510B wheels.
Next question. The GP that has the HA229C wheels is
serial # 213756, which falls into the range you listed
below for the other wheels. Could either set of wheels
have been original equipment? I can't get the two
types side by side to compare them, but they are quite
similar. 
Thanks,

John Boehm
Woodland, CA
Visit my web site at http://vintagetractors.com


--- Duane Larson <jdlarson at comcast.net> wrote:

> John,
> Your wheels are F&H, 24" x 6", with 3 weight stops
> on outside of hub, and 
> were used on s/n GP 213038-213537, 213543-216299 and
> 216800-228109.
> Hope this helps.
> Duane
> 
> ----- Original Message ----- 
> From: "John Boehm" <rustyacres at yahoo.com>
> To: "Antique John Deere mailing list" 
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Saturday, January 20, 2007 5:57 PM
> Subject: [AJD] French and Hecht front wheel info
> needed
> 
> 
> > I've acquired a pair of round spoke cut off front
> > wheels. The hub has the casting number of HA510B.
> >
> > I compared it to  the front steel wheels on a 1929
> GP.
> > The GP steel has a  casting number HA229C. The
> center
> > hubs and spokes  look  very similar on these sets
> of
> > wheels.
> >
> > I was hoping that the list members who are more
> > knowledgeable about wheels can help to identify
> what
> > the HA510B wheels were used for.
> >
> > Thanks,
> >
> > John Boehm
> > Woodland, CA
> > Visit my web site at http://vintagetractors.com
> >
> >
> > _______________________________________________
> > Antique-johndeere mailing list
> >
>
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
>
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>