[AT] 580 B backhoe
Richard Fink Sr
nancydick at pennswoods.net
Wed Jan 17 07:29:06 PST 2007
Danny i have a 580B and yes that cyl. can be rebuilt on the machine.
There will be one or two screws in the side of the head [part that
screwsout] then it takes a spanner wrench with two pins in it or big
set channel locks. swing hoe to the side your are NOT going to work
on pull out pin. Unscrew head hold swing pedal toward side you are
going to take apart. Then turn over with starter and it will push
right out. I get my packing from case and some local rebuild places
price is not much difference between them. Should take about 1 hour
if nothing is rested fast. Have fun
R Fink
PA
At 07:40 PM 1/16/2007 -0800, you wrote:
>Hello all, I have a few questions about my 580B
>backhoe and am hoping some of my ATIS freinds can help
>me out.
>
>First on the hoe the serial # plate is unreadable.
>Might as well say non existant. Is there any way I can
>tell what model the hoe is, so I can get the proper
>manual/parts book for it?
>
>Second the left swing cylinder is losing oil
>profusely. Is it possible to repack the cylinder with
>it still on the tractor. Also how difficult are these
>cylinders to rebuild. I've been told they are easy and
>I feel confident that I can do the job. However,
>honestly I've never gotten into a cylinder before and
>I don't wish to get into it blind. So "how to" advice
>is welcome
>
> I've also posted these questions on the Case YT
>forum. I figure I can use all the knowledge and help I
>can get!!
>Danny Tabor
>
>
>
>
>____________________________________________________________________________________
>The fish are biting.
>Get more visitors on your site using Yahoo! Search Marketing.
>http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list