[AJD] New to me R's and D

[Patricia Stangeland]

Chris,
         you are real close on the weight estimate. I
have hauled mine about 3,000 miles and every haul is a
big load for my 1996 Dodge 1T pulling a goose neck
equipment trailer.
       Good luck,
                        Tim, Montesano WA


--- Chris C <jdnutinwa at yahoo.com> wrote:

> I have never owned a Two Cylinder Diesel before, 
> now
> after today I own three...   I bought the two R's
> that
> I mentioned earlier,  plus a third one for some of
> the
> parts that I need.
> 
>   I also purchased a 1937 D.  The D has cast centers
> on the rear,  and cut down round spokes on the
> front. 
> It has a really nice original 7.50 -16 front tire, 
> and nonthing on the other side..  The old guy bolted
> a
> truck wheel to the spokes of the rim to 'add a tire'
> to the front to move it around..  
> 
>    R#1 I won't quite go as far as to say it is
> restored,  but has been painted,  has new rear
> tires, 
> nice fenders and hood,  and an ok nosepiece. Older
> paint job but it looks nice. The pony motor is off
> the
> tractor,  it had frozen and cracked the block.  It
> has
> been welded and is ready to be re-assembled.  Comes
> with gaskets and new rings... The rear axle housing
> is
> cracked at the outboard bearing on the left side, 
> and
> has a 'repair' done to it. It also comes with a good
> axle housing.   No PTO or hydraulics on this
> tractor. 
> 
>    R#2 was a tandem R. It is missing the front axle,
> and all steering linkages from the shaft that goes
> down through the crankcase.  The shaft is there, as
> is
> the steering wheel,  but nothing else.  This tractor
> has Hydraulics and a PTO. It also has inner and
> outer
> rear wheel weights.  Tires are weather checked but
> hold air. It is missing the hood and front grill. 
> The
> exaust manifold is broken.
> 
>    R#3 is rumored to have been rebuilt and then had
> a
> barn collapse on it.  The frame was broken and
> replaced with the frame from an 80.  The hood and
> grill were smashed.  
> 
>    So I am in the R business now.  I can't find a
> weight in any of the books I have for the R's.  I am
> guessing around 8500 pounds but I can't find it in
> print in anything I have.  I imagine it changes
> drastically with fluid filled tires vs. air filled.
> Any help on weights would be appreciated.  I hope to
> pick the at least one R and the D up on Friday.  
> 
>     I did not get a chance to take pictures today, 
> the weather was just awful and cold up there today..
> 
>                Chris
> 
> 
> Chris Carl
> Camano Island, Washington
>  
> Collector of:
> John Deere
> Caterpillar
> Bucyrus Erie
> 
> 
>  
>
____________________________________________________________________________________
> Never miss an email again!
> Yahoo! Toolbar alerts you the instant new Mail
> arrives.
> http://tools.search.yahoo.com/toolbar/features/mail/
> _______________________________________________
> Antique-johndeere mailing list
>
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>