[Farmall] Help with snow plow adjustment

[Mike Sloane]

We recently put down about 20 truckloads of "millings" on our private 2 
mile lane. Some of the millings were quite coarse, and I am faced with 
the same problem. Frankly, I don't think there is anything you can do 
until the surface freezes solid. I am just going to have to go back over 
the edges  with a rear scraper blade on one of the tractors and pull the 
whole mess back to the middle of the road in the Spring.

Mike

Ivan Cousins wrote:
>   I have a blade off a plow ment for a truck mounted on the farmall A  . 
> Works great on my cement driveway , however the neighbors that I plow have 
> tar & chip drives . I have the skids down so that I leave about 1/2 " of 
> snow on their drives but it still rolls the chips right off their drive way 
> unless I'm extra carefull . When it s snowin and blowin after working all 
> day I'm not in the mood to take a lot of time .   Which way should the blade 
> be angled , forward or backwards so that it doesnt dig in so bad ? Right now 
> its almost straight up .  Ivan 
>