[AT] Need advice on 3pt Tractor

Rick Weaver Rick_Weaver at hilton.com
Wed Aug 15 07:41:24 PDT 2007


Just curious, are there crawlers with 3pt hitches you could put a blade
behind?  If you're grading in the wet season, you'll just end up making
puddles deeper (at least that's how it works with me).

I would think a crawler with less pounds/square inch ground pressure
would do a better job grading.  Or better yet, a small dozer?

Just some thoughts.

Rick Weaver

 
-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Francis
Robinson
Sent: Wednesday, August 15, 2007 6:52 AM
To: Antique tractor email discussion group
Subject: Re: [AT] Need advice on 3pt Tractor

----- Original Message ----- 
From: "toma" <toma at risingnet.net>
To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
Sent: Wednesday, August 15, 2007 2:38 AM
Subject: [AT] Need advice on 3pt Tractor


> All of my tractors are Caterpillars. I have never owned a wheel
tractor. I
> want to look for a wheel tractor with a 3 point hitch that I can set
up
> with a grader blade. I worked on a ranch for a while that had an old
> Massey Furgusen that I think was about a 50 hp tractor. I got to be
pretty
> good at grading roads with it. Last year I rented a 4wd Ford that I
think
> was about 30 hp, it did and OK job too.
>
> I want to get a tractor that I can easily move on a trailer behind a
3/4
> ton pickup. In our area most of the houses are on 5 acre parcels so
most
> have extensive driveways, the soil is mostly DG. I want to see if I
can
> finance a career change by grading driveways during the wet season.
>
> What I am thinking about is a '50's or 60's model tractor in the
> $2000-$3000 range. I know most of you guys are more knowlegeable about
> tractors like this than I am so I am asking for recommendations as to
make
> and model that would be good for this purpose.
>
> There are lots of tractors around this part of California so I figure
I
> just need to visulize what I want and one will show up. This
visualization
> technique has always worked well for me in the past. A while back I
> visualized a D8 and one showed up right away.
>
> Thanks,
>
> Tom


^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^



    Ooooooooooooooh what a dangerous concept...   ;-)   Just watching a 
beauty contest would place me in grave danger...   ;-)

    Based on tractors I am personally familiar with if I was looking for
a 
tractor specifically for grading drives I would probably look for an 
International 300 Utility with fast hitch. Yeah, I know it is not 3
point 
but can be with adapters. Down pressure was available but when sat on
float 
(pin out) depth control could be set and would stay right there. I just 
liked the way the hydraulics worked and even though the one we used was 
manual steering (some have power steering) steering was quite easy. We
kept 
a steering knob on it and it was the easiest steering tractor on the
farm 
back in the mid 1950's.


--
"farmer"

Francis Robinson
Central Indiana, USA
robinson at svs.net 

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at




More information about the AT mailing list