[Farmall] F- 20

[Tony Pitts]

Thanks. My carb is fully rebuilt, so I kow the problem is not there.  Either my reassembley or the governor.
 
--------------------------------------------
Tony Pitts 
Ann Arbor, MI 
http://www.oldengine.org/members/pitts/mbf 
--------------------------------------------
Hudson Mills Old Power Club
17th Annual Show June 6-8, 2008
Dexter, MI
http://www.hudsonmills.org
--------------------------------------------
Washtenaw Baseball Club
U10 Boys Travel Baseball
www.washtenawbaseball.com
--------------------------------------------



----- Original Message ----
From: "farmall36 at vci.net" <farmall36 at vci.net>
To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
Sent: Saturday, August 11, 2007 6:28:15 PM
Subject: Re: [Farmall] F- 20


Tony,, our F-20 just would idle  no throttle.  Take the cap off where the 
throttle rod goes into carb  Spray a can or 2 into the hole, then put qa 
small cresent wrench on the carb rod goingand esay now try to move it until 
you can move it by hand. Have you checked the gov spring  ? make sure it 
aint broken.
I gant tell ya any more now, because my throttle works now, might still 
stick a bit.  But mines running like CRAP
And I cant figure whays going on ? appears to be a bit out of tim although I 
didnt do anything to the timing.
Will let yall kno afterwhile.
Kevin
--------------------------------------------sep line<>


----- Original Message ----- 
From: "Tony Pitts" <mgomaize at yahoo.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Friday, August 10, 2007 1:04 PM
Subject: Re: [Farmall] F- 20


> Very related question.  My F-20 that had not run in 50 years but now does 
> seems to have a run away engine speed.  Unless, I have the governor 
> control (?) pushed all the way in, it wants to speed up like crazy.  I am 
> not seeing anything not moving in the governor, so I am not sure if the 
> problem is there, with the linkage to the carb, or another cause.
>
> This is a link to a picture that shows a denet amount of detail that may 
> help identify the governor type: 
> http://www.oldengine.org/members/pitts/mbf/images/Reassembley_011.jpg
>
> Any ideas would be appreciated.
>
> Thanks,
>
> Tony
>
> --------------------------------------------
> Tony Pitts
> Ann Arbor, MI
> http://www.oldengine.org/members/pitts/mbf
> --------------------------------------------
> Hudson Mills Old Power Club
> 17th Annual Show June 6-8, 2008
> Dexter, MI
> http://www.hudsonmills.org
> --------------------------------------------
> Washtenaw Baseball Club
> U10 Boys Travel Baseball
> www.washtenawbaseball.com
> --------------------------------------------
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall