[AT] Case VAS Question

[oldiron62 at gmail.com]

  I would be a bit leery about usein brake fluid,
30W non detrgent you shoule be able to get it at a Dollar store  or Freds 
Wall mart may have.it.
If ya have 10-30 motor oil it would be 100% better than the brake fluid. 
That tractor is like a IH C they use the same hy fl as what you put in the 
engine.
Kevin


----- Original Message ----- 
From: "Tim Bivens" <bivenshill at yahoo.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Thursday, August 09, 2007 8:25 AM
Subject: Re: [AT] Case VAS Question


> On the Case VA series the hydruaulic fill is on the
> left side of the torque tube. There is a large pipe
> plug there that has about a 3/4" square head on it.
> Directly behind that is a square plate that houses the
> hydraulic filter. The manual calls for 30 wt.
> non-detergent motor oil. I just use regular tractor
> hydraulic fluid in my VAC.
> Tim Bivens
> --- Tim Nobles <tnobles at netsync.net> wrote:
>
>> Where does hydralic fluid go in a Case VAS?  Is it
>> part of the transmission?
>> What weight oil/fluid is to be used?
>>
>> Hello to all, am still alive and lurking.  Was
>> planning on going to Portland
>> this year, but have health issues.
>>
>> Thanks alot
>>
>> Tim Nobles
>> tnobles at netsync.net
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at