[Farmall] F- 20

farmall36 at vci.net farmall36 at vci.net
Tue Aug 7 17:48:39 PDT 2007


    Ok  today it wants to run faster than I like.  No adjusting idle sqrew 
just run at high idle.
Probably no more than it ought to run wide open, but more than I felt ok 
with.  So I shut the gas off and let it run out.
I dont want to run it real fast just be able to grab the throttle when 
needed.
Really hot out here today over 100 in the shade, good wind out of the south. 
Kind of day make me glad there wasnt 800 bales on the ground :-)
Kevin


----- Original Message ----- 
From: "Andy glines" <pioneersop96 at yahoo.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Tuesday, August 07, 2007 7:48 AM
Subject: Re: [Farmall] F- 20


> The tricky part with your question is that there is
> more than one style of throttle linkage for an F-20.
> Let's star out by figuring out which one you have (or
> don't have).  Does your tractor have two levers next
> to the steering wheel?  One lever will be hooked to
> the magneto and the other is the throttle?  With this
> type the throttle lever is usually hooked to the
> gov-to-carb linkage near the left front of the
> tractor.  A picture is worth a thousand words if you
> have a place to post one.
>
> --- farmall36 at vci.net wrote:
>
>>     No knob, this one has a spring from throttle
>> link to a lever that is L
>> shaped above the flyweights that is on a pivot with
>> throttle rod running
>> accross in front of engine to another rod running to
>> carb all enclosed in
>> tubes.
>> Everything seems to be hooked up I think it mabe
>> stuck.
>> Will try it in the morning.
>> This tractor is not even considered rare I think
>> they made about a million
>> of them. Go to IH dealer ask a question about it and
>> get a strange look and
>> quick i dont know.
>> Kevin
>> ----- Original Message ----- 
>> From: <farmallgray at aol.com>
>> To: <farmall at lists.antique-tractor.com>
>> Sent: Monday, August 06, 2007 8:55 PM
>> Subject: Re: [Farmall] F- 20
>>
>>
>> >
>> > You may have one wih the single speed governor.
>> They have a knob on the
>> > back of the governor housing that you turn
>> clockwise for more RPMS. The
>> > throttle lever only closes the butterfly in the
>> carb.
>> >
>> > You get no governor action when you throttle it
>> down with the lever.
>> >
>> > Todd
>> >
>> >
>>
>> _______________________________________________
>> Farmall mailing list
>>
> http://www.antique-tractor.com/mailman/listinfo/farmall
>>
>
>
> Andy Glines
> Evansville, IN
>
>
>
> ____________________________________________________________________________________Ready 
> for the edge of your seat?
> Check out tonight's top picks on Yahoo! TV.
> http://tv.yahoo.com/
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 




More information about the AT mailing list