[Farmall] Farmall Digest, Vol 40, Issue 5

[Matthew Gray]

ok back in the P4 and P6 days, perkins also supplied kits to convert 
ferguson TEA20'sb

perkins got stuffed into a lot of things over the years, never heard of one 
in TD9.......

thanks everyone for the interesting reading
----- Original Message ----- 
From: "Mike Schmudlach" <mschmudlach at charter.net>
To: "'Farmall/IHC mailing list'" <farmall at lists.antique-tractor.com>
Sent: Saturday, August 04, 2007 2:55 PM
Subject: Re: [Farmall] Farmall Digest, Vol 40, Issue 5


> In Europe Perkins make a kit for the H and M.
>
> -----Original Message-----
> From: farmall-bounces at lists.antique-tractor.com
> [mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of David A.
> Gregg
> Sent: Sunday, August 05, 2007 6:57 PM
> To: farmall at lists.antique-tractor.com
> Subject: Re: [Farmall] Farmall Digest, Vol 40, Issue 5
>
>
>>>IH TD9 Crawler, good cond., has pto lights one remote Perkins engine 90+
>>>hp, $4,000. OBO. Lancaster Co. 717-656-9660.
>>
>>
>> is that common?
> The Perkins? Probably not as rare as one might think - people will stick
> any engine that fits into a machine, although I am not sure that a TD9
> benefits all that much from having 90 hp.
>>
>
>
> I wonder? Back in the mid Sixties Dad and Grandpa bought a TD9 that had
> blown the engine during the latter part of WWII. It had a belt pulley on 
> it
> and was used to run a saw mill. They had made up a line shaft with the
> original flywheel/ clutch on it and mounted a large V4 Wisconsin on it. 
> They
> ran the mill for 10+ years this way. We removed the belt pulley which just
> fit over the PTO.
> Since it was not used for anything else the tracks and undercarriage where
> new.
> They had a new Perkins installed. Made for a great farm tractor to plow 
> and
> work ground. As they used the original tank for gas it had rusted bad on 
> the
> inside so we mounted a 55 gal drum out in front of the radiator along with
> some additional weights for counter ballast. We did a lot of minimum 
> tillage
> type of farming before it was in fashion and used a lot of chisel plow
> tillage tools. Tore several tongues out of new ones with this as the 
> tracks
> didn't allow any give when we hit the hard spots. It didn't help that we 
> ran
> them deep as we could get them in. Used it till around 1980 when my 
> granddad
> died. It was sold at his sale to a tractor jockey and I don't know where 
> he
> sold it.
> Wonder if it could be the same one.
>
> David Gregg
> NW  Ohio
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>