[AT] Troubleshooting no start

[Kevin]

  Yes and if it dont charge anyhow why not replace the 6v with
a 12v alt. Before ya run it much get a ballast resistor and put in between 
pos and coil + or you will pop the coil !
Kevin
----- Original Message ----- 
From: "Greg Hass" <gkhass at avci.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Thursday, September 28, 2006 11:58 AM
Subject: RE: [AT] Troubleshooting no start


>
> Someone correct me if I'm wrong, but couldn't you hook up a 12 volt 
> battery to just the coil. I think you would have to match the polarity to 
> the battery in it now. It wouldn't hurt the points to run for a short time 
> and would tell you if a weak spark could be the problem. Also, and this is 
> just a maybe, my experience has been that when a tractor won't start and 
> the plugs are sooted I have to change to new ones to get it started. After 
> I get it running good again and fix the original problem, I can usually 
> put in the cleaned plugs and work the tractor to get it hot and the plugs 
> will clean up and be fine.
> Greg Hass
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at