Spam/Phish> Re: [AT] Towing

Al Jones aljones at ncfreedom.net
Mon Sep 4 06:32:22 PDT 2006


Charlie, I did some google-ing for Silent Flame last night, I wonder if
Long didn't buy them out later on?

Al

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie hill
Sent: Monday, September 04, 2006 7:07 AM
To: Antique tractor email discussion group
Subject: Re: Spam/Phish> Re: [AT] Towing

Yes Al I think that was one brand.  Silent Flame was best known for
making 
tobacco barn burners.  There were other manufacturers of harvesters but
I 
can't tell you the names now.  Long probably did make one.  Most of
their 
business was centered around tobacco farmers.

We always pulled (croped, broke, primed or picked) tobacco on our feet. 
Seems like the hard way but once you get out of the bottom leaves it
really 
isn't.

Charlie
----- Original Message ----- 
From: "Al Jones" <aljones at ncfreedom.net>
To: "'Antique tractor email discussion group'" 
<at at lists.antique-tractor.com>
Sent: Sunday, September 03, 2006 6:27 PM
Subject: RE: Spam/Phish> Re: [AT] Towing


> Charlie, that would be the Silent Flame harvester, right?  I vaguely
> remember one of them still running in our community in the late 70's
> when I was very small.  Didn't Long make something similar in later
> years?
>
> When I was in high school and we would go to Raleigh for various FFA
> events, there was a Silent Flame sitting outside of Goldsboro on Hwy.
> 70.  I think it was beside an antique store or something.  As I
recall,
> the thing looked like it was ready to go to the field.
>
> Al
>
> PS. Charlie, don't forget Farmer's Day in Richlands this week!  If you
> know of any tractor owners, tell them to bring em on.
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie
hill
> Sent: Sunday, September 03, 2006 11:49 AM
> To: Antique tractor email discussion group
> Subject: Re: Spam/Phish> Re: [AT] Towing
>
> Hi David,  we had some like that here too.  I almost believe those
were
> manufactured or at least started out that way and were copied.  We
> started
> seeing them about the time we started seeing the first "harvesters"
not
> the
> new, automatic mechanical harvesters we have now but the old ones that
> several people rode on that had the big chain drive front wheel and
> usually
> a Wisconsin engine pulling it.
>
> Charlie
> ----- Original Message ----- 
> From: "David Bruce" <davidbruce at yadtel.net>
> To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> Sent: Saturday, September 02, 2006 7:57 PM
> Subject: Re: Spam/Phish> Re: [AT] Towing
>
>
>> The version here was two wheeled, on a metal trailer chassis with a
> wooden
>> deck angled from the sides into the middle of the "trailer".  The
> front
>> and back were both made of wood and about 4 feet above the deck.
They
>
>> were narrow enough to fit in the field in a "blank balk" (one row was
>> skipped during plant setting to make the blank).  Those that ran on
> the
>> county roads often also had a trap as a cover so the leaves could be
> tied
>> down to prevent loose leaves flying.
>> Mechanical harvesters are now moving in and the design of the
"tobacco
>
>> trailers" is changing again.
>>
>> David
>> NW NC
>>
>> charlie hill wrote:
>>> Al,  the first tobacco trucks I remember were 4 wheeled with a front
> axle
>>> that pivoted under the front of the "truck". (For those following
> along
>>> Al grew up about maybe 60 miles from where I did and I'm sure he's
> seen
>>> these same carts)  The whole rig was made usually out of oak or
maybe
>
>>> cypress.  If they were made of pine it was probably heart pine.
Even
> the
>>> wheels were wooden with a metal rim.  They were only about maybe
10"
> to
>>> 1 foot diameter and about 2 1/2 or 3 inches thick. The axle frames
> were
>>> wooden with a piece of iron rod about 3/4 diameter fastened to the
> bottom
>>> and extending through the wheel center with a big washer and a nail
> or
>>> something holding the wheel on.
>>>
>>> The deck of the truck or cart  (depending on where you live), was a
> flat
>>> wood deck about 30" wide and just above the small wheels.  It had a
> hole
>>> drilled in each corner and one half way down each side. A post,
> usually
>>> made of white  oak, was driven in the holes.  The top of the post
had
> a
>>> nail driven in it with the head cut off.  A burlap curtain hung from
> the
>>> nails and encircled the truck to hold the carefully laid tobacco
> leaves
>>> in place. These were made to be pulled by mules.
>>>
>>> Later on we went to a "truck" that was about 3 feet wide and had one
> old
>>> car axle under the middle and a tongue to hitch it to the tractor.
> They
>>> had a bulkhead at each end and a burlap curtain attached to a 1x4
> that
>>> ran between the bulkheads at the top.  They could be taken loose and
>>> rolled down out of the way when the load of tobacco got to the barn.
>>> Most of these were made of pine around home.  They weren't intended
> to
>>> last as long as the old 4 wheel type.
>>>
>>> Charlie
>>>
>>>
>> _______________________________________________
>> AT mailing list
>> Remembering Our Friend Cecil Monson 11-4-2005
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.405 / Virus Database: 268.11.7/436 - Release Date:
> 9/1/2006
>>
>>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.7/436 - Release Date:
9/1/2006
> 

_______________________________________________
AT mailing list
Remembering Our Friend Cecil Monson 11-4-2005
http://www.antique-tractor.com/mailman/listinfo/at






More information about the AT mailing list