[AT] I Just can't believe it

[Kevin]

Shoot me  aprice before you get rid of them Dodge motors.  Thank ya
kevin
----- Original Message ----- 
From: "Ed Stewart" <edstewart1 at verizon.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, October 25, 2006 9:06 PM
Subject: Re: [AT] I Just can't believe it


> Hi Kevin, it is in real bad shape the wooden wheels are shot and when I 
> moved it the frame broke. I bought it and a spare 1921 engine just for the 
> engines It was shortened about four feet and a drawbar wielded to the 
> frame the propeller shaft was cut and wielded, there is a 1923 engine on 
> the frame that started after cleaning the carb and mag points, the engine 
> sounds good after all the cherry pits that mice stored in the exhaust 
> manifold for years came out like buckshot.. I will try to get a pic when 
> the weather gets drier here, if ever. It didn't have a ignition switch 
> just a mag kill, to prevent theft you put it in reverse and turned a key 
> lock on the tranny so all you could do is backup till you unlock it. It 
> was a Dodge brothers 1/2 ton pickup at one time. A friend gave me a 
> Farmall F12 frame to put the engine on so, that is where the engine will 
> end up (unless some antique car restorer should want them) I suppose. But, 
> the steering wheel is a ok, wood and metal. :-)  Ed
> Kevin wrote:
>> Ed  hey you have any pictures of your dodge tractor ?  I would like to 
>> see it.
>> Kevin Mosier
>> ----- Original Message ----- From: "Ed Stewart" <edstewart1 at verizon.net>
>> To: "Antique tractor email discussion group" 
>> <at at lists.antique-tractor.com>
>> Sent: Wednesday, October 25, 2006 6:58 PM
>> Subject: Re: [AT] I Just can't believe it
>>
>>
>>> Hi, 112.50 bucks now, someone must want it bad. I got to go out and take 
>>> the steering wheel off my 21 dodge homemade tractor right now and hang 
>>> it up here in the house :-) . Ed
>>>
>>> Bob Seith wrote:
>>>> I think my father paid $100 for an entire (running) Fordson when he 
>>>> started farming in the mid-1930s. When he tried to trade it in against 
>>>> a new Farmall A in the mid-1940s, I think the dealer said he would haul 
>>>> it away for him.
>>>>
>>>> Moral: Never throw anything away!
>>>>
>>>> Bob Seith
>>>>
>>>>
>>>> Bill Thompson wrote:
>>>>
>>>>> FORDSON TRACTOR STEERING WHEEL Antique Ford old farm
>>>>>
>>>>> Item number: 320039739968
>>>>>
>>>>>
>>>>> I just can’t believe it
>>>>>
>>>>> _______________________________________________
>>>>> AT mailing list
>>>>> Remembering Our Friend Cecil Monson 11-4-2005
>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>
>>>>
>>>> _______________________________________________
>>>> AT mailing list
>>>> Remembering Our Friend Cecil Monson 11-4-2005
>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>
>>>
>>> -- 
>>> This email sent from the wonderful world of Ubuntu Linux!
>>> Nothing was needed from Micro$oft.
>>> Ed Stewart(using DSL connection)
>>> Reynoldsville, PA.
>>> 15851
>>>
>>> _______________________________________________
>>> AT mailing list
>>> Remembering Our Friend Cecil Monson 11-4-2005
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> Remembering Our Friend Cecil Monson 11-4-2005
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
> -- 
> This email sent from the wonderful world of Ubuntu Linux!
> Nothing was needed from Micro$oft.
> Ed Stewart(using DSL connection)
> Reynoldsville, PA.
> 15851
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at