[Steam-engine] Gauge adjustment.
Ken Hough
k4sb at niia.net
Sat Nov 18 21:08:45 PST 2006
Hi Rick
I think if you googled "instrument repair" "Gage / Gauge repair"
You get the idea. Of course the same issues plague this type of repair as
does Pop Valve repair. Someone does half a job instead of examining the
whole gage. Look them up on google and call them. Ask for references
and you might even call your local generating plants instrument repair
department.
Ken
Thank you Ken..maybe you know someone else who does gauge repair?
Take Care,
RickinMt.
----- Original Message -----
From: "Ken Hough " <k4sb at niia.net>
To: "Steam-engine mailing list" <steam-engine at lists.stationary-engine.com>
Sent: Saturday, November 18, 2006 6:09 PM Subject: Re: [Steam-engine]
Gauge
adjustment.
> The hair spring holds it against the pin. This removes all slop in the
> gear train. The issue here that has a trained, qualified and bonded
> repairman done the work inside the gage before the needle is replaced?
> I'm qualified to do this work having trained in the US Navy how to. But
> I'm not bonded. I contacted my insurance company to find out about
> getting bonded. They referred me to the Hartford Ins. Co. Contacting
them
> I was informed that bonding is very similar to being certified to weld
on
> a boiler. Lots of paper-work and lots in yearly premiums. Ken
>
>
> Once the needle is off, what's the proper proceedure for putting it
> back
> on? Is slop allowed in any of the linkages? Ours has a lot in one
place
> by the tube.
>
> TIA,
> RickinMt.
>
> _______________________________________________
> Steam-engine mailing list
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
> Ken Hough Photographic Repair Service
> Specializing in the Complete restoration of
> Deardorff View Cameras
> Est 1982
> www.deardorffcameras.0catch.com
> 219 462 0281
>
> _______________________________________________
> Steam-engine mailing list
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>
_______________________________________________
Steam-engine mailing list
http://www.stationary-engine.com/mailman/listinfo/steam-engine
/steam-engine
Ken Hough Photographic Repair Service
Specializing in the Complete restoration of
Deardorff View Cameras
Est 1982
www.deardorffcameras.0catch.com
219 462 0281
More information about the AT
mailing list