[AT] Cockshutt 40

John Hall jthall at worldnet.att.net
Sat Nov 25 05:00:02 PST 2006


I've run into rim bolts befoe that had to be driven out with a big punch but 
never heated.  I think we've even had to replace some due to corrosion. 
Wonder how well an impact hammer would do at breaking them loose? That's a 
tool I don't have but have often considered getting.

John
----- Original Message ----- 
From: "Pat Ruston" <ruston at orc.ca>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Saturday, November 25, 2006 7:20 AM
Subject: [AT] Cockshutt 40


> Should have mentioned the tires have been removed from the rims, the tire 
> shop came out to replace rear tires, found some holes in the rims probably 
> caused from the calcium chloride leaking, so I am not able to drive the 
> tractor around, have the nuts removed from the bolts holding the rim 
> locks, not able to remove the 5/8" carriage bolts that go through the cast 
> iron hub, will try heating the bolts to see if that will help, thanks
>
> Pat Ruston
> St. Pauls Station
> Ontario, Canada
> ruston at orc.ca
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at 




More information about the AT mailing list