[Farmall] Seed Plate Drive

[Bobby Guilbeau]

Now that we are all on the same page looks like Jim was correct about what
you were trying to take off.  

Of course the million dollar question now is do you have a cover?

Bobby



-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Richard Pope
Sent: Thursday, May 04, 2006 8:16 PM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] Seed Plate Drive

Jim, Al and Bobby:

Thank you all for your info.  Here is a photo of the part that I'm trying to

remove:

http://img61.imageshack.us/my.php?image=p50352297we.jpg

This next photo is the final drive that I took off the tractor:

http://img61.imageshack.us/my.php?image=p50352353rr.jpg

Perhaps it has a thick washer under that bolt that I can use on the new 
final drive and then I'll just use the cap also.

Thanks,

Richard


----- Original Message ----- 
From: "Jim Becker" <jim.becker at verizon.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Thursday, May 04, 2006 4:49 PM
Subject: Re: [Farmall] Seed Plate Drive


> Al,
> I think Richard has gotten past the step of removing the sprocket and is 
> trying to get the plate drive shaft off.  It is held with a cap screw 
> about the same way the Cub sprocket is held on.
>
> Richard,
> Removing the cap screw won't cause any other problems.  What I don't 
> remember off the to top of my head is what you need to reinstall if you 
> are going to use the tractor without the drive.  Seems like you need to 
> reinstall the cap screw with a washer of some sort, and install a cover in

> place of the drive.  The cap screw is about 3/8 x 3/4.
>
> Jim Becker        jim.becker at verizon.net
>
> ----- Original Message ----- 
> From: "Al Jones" <aljones at ncfreedom.net>
> To: "'Farmall/IHC mailing list'" <farmall at lists.antique-tractor.com>
> Sent: Thursday, May 04, 2006 5:42 PM
> Subject: RE: [Farmall] Seed Plate Drive
>
>
>> No.  The cap screw is a bolt that goes through two sets of holes--one in
>> the sprocket, one in the hollow shaft that comes out the final drive
>> case.  I think it is "supposed" to be a pin with a cotter pin in the end
>> of it.  But it may be a 5/16" bolt with a nut on the end, as that's
>> what's in mine.  You may have to tap/twist the sprocket to make it come
>> off but I can't imagine you tearing anything up unless you decide to cut
>> it off with a torch :)
>>
>> PS I think the Cub sprocket was held on with a single cap screw.
>>
>> Al
>>
>> -----Original Message-----
>> From: farmall-bounces at lists.antique-tractor.com
>> [mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Richard
>> Pope
>> Sent: Thursday, May 04, 2006 5:58 PM
>> To: Farmall/IHC mailing list
>> Subject: Re: [Farmall] Seed Plate Drive
>>
>> Hi Jim:
>>
>> By removing this cap screw, will I have any chance of messing anything
>> up
>> inside the final drive?  What size is this cap screw?  Thanks for your
>> help,
>> it is appreciated!
>>
>> Richard Pope
>> Apple Valley, CA
>>
>>
>> ----- Original Message ----- 
>> From: "Jim Becker" <jim.becker at verizon.net>
>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>> Sent: Thursday, May 04, 2006 6:07 AM
>> Subject: Re: [Farmall] Seed Plate Drive
>>
>>
>>> Been a long time since I took one off.  As I recall, look in the end
>> of it
>>> and you will find the head of a cap screw.  Take it out and the piece
>> will
>>> slide off.
>>>
>>> Jim Becker        jim.becker at verizon.net
>>>
>>> ----- Original Message ----- 
>>> From: "Richard Pope" <popeman at verizon.net>
>>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>>> Sent: Thursday, May 04, 2006 6:37 AM
>>> Subject: [Farmall] Seed Plate Drive
>>>
>>>
>>> List:
>>>
>>> I need info on how to remove the "Seed plate drive" from the final
>> drive
>>> on my Super A.  Is it threaded and just unscrews, or do I have to
>> perform
>>> major surgery?
>>>
>>> http://img74.imageshack.us/my.php?image=p50352297er.jpg
>>>
>>> Thanks in advance,
>>>
>>> Richard Pope
>>> Apple Valley, CA
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 


_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall