[Farmall] Polarity Change Directions for Dummies

Thu May 25 10:06:27 PDT 2006

Why do your want to change the polarity,it is supposed to
be positive ground and unless yourv'e changed something
else you don't have to change polarity.

--- hrb48 at comcast.net wrote:

> Hi all yiu old iron folks out there. I bought an "H"
> (1950) about 5 or 6 years ago and I have been puttsying
> with it for that long in my garage. Time makes changes
> and so does life. 
> I've done considerable work on it but not as much as I
> would have liked. The generator and the starter have been
> cleaned and tested, the radiator the same. I cleaned the
> oil sump and the oil pan and replaced all gaskets.  I
> rebuilt the carburetor and replaced the sediment bulb.
> I've replaced the oil filter and the oil pressure guage
> as well as the temp indicator. There is still much work
> to be done but I'm forced to move it outside. Now, we
> have come to , for me, a major stumbling block. I need
> some direction for dummies on how to change the polarity
> of the system. It is still 6 volt and system calls for
> change polarity before using  it.
> 
> HELP                                               Harry
> Bryant, Downingtown,PA
> --NextPart_Webmail_9m3u9jl4l_14393_1148575066_0
> Content-Type: text/html
> Content-Transfer-Encoding: 8bit
> 
> <html><body>
> <DIV>Hi all yiu old iron folks out there. I bought an "H"
> (1950) about 5 or 6 years ago and I have been puttsying
> with it for that long in my garage. Time makes changes
> and so does life. </DIV>
> <DIV>I've done considerable work on it but not as much as
> I would have liked. The generator and the starter have
> been cleaned and tested, the radiator the same. I cleaned
> the oil sump and the oil pan and replaced all
> gaskets.  I rebuilt the carburetor and replaced the
> sediment bulb. I've replaced the oil filter and the oil
> pressure guage as well as the temp indicator. There is
> still much work to be done but I'm forced to move it
> outside. Now, we have come to , for me, a major stumbling
> block. I need some direction for dummies on how to change
> the polarity of the system. It is still 6 volt and system
> calls for change polarity before using  it.</DIV>
> <DIV> </DIV>
>
<DIV>HELP                                              
> Harry Bryant, Downingtown,PA</DIV></body></html>
> 
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 

Take Care,God Bless 
 Gary
 Redtractorman at yahoo.com

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 