[AJD] 530 Rebuild

[Louis]

I would recommend taking them to a machinist.  You might want to look at
your camshaft.  That is probably worn to.  You can have the cam reground.

Lou

-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf Of
Kenneth Jones
Sent: Friday, May 19, 2006 8:28 AM
To: ATIS
Subject: [AJD] 530 Rebuild


Getting ready to reinstall the camshaft and took a real good look at the cam
followers. Several have indentations worn into the follower face and two
have slight rust pits.  Can these followers be refaced?  Can it be done with
emery paper or best left to a machinist?   Your advise would be appreciated
   
  Thanks 
   
  Ken Jones

--0-1889007647-1148041667=:65241
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>Getting ready to reinstall the camshaft and took a real good look at
the cam followers. Several have indentations worn into the follower face and
two have slight rust pits.  Can these followers be refaced?  Can
it be done with emery paper or best left to a machinist?   Your
advise would be appreciated</DIV>  <DIV> </DIV>  <DIV>Thanks </DIV>
<DIV> </DIV>  <DIV>Ken Jones</DIV>
_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere