[Farmall] Seed Plate Drive

[Bobby Guilbeau]

Ditto guy's,

 I have a 53 A/V and the sprocket is held on with a pin.  Remove the pin and
the sprocket should just slide off.  Then you can out the cover back on,
i.e. if you have the cover<snicker>.....

Bobby Guilbeau
St. Landry, LA 


-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Al Jones
Sent: Thursday, May 04, 2006 5:43 PM
To: 'Farmall/IHC mailing list'
Subject: RE: [Farmall] Seed Plate Drive

No.  The cap screw is a bolt that goes through two sets of holes--one in
the sprocket, one in the hollow shaft that comes out the final drive
case.  I think it is "supposed" to be a pin with a cotter pin in the end
of it.  But it may be a 5/16" bolt with a nut on the end, as that's
what's in mine.  You may have to tap/twist the sprocket to make it come
off but I can't imagine you tearing anything up unless you decide to cut
it off with a torch :)

PS I think the Cub sprocket was held on with a single cap screw.

Al

-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Richard
Pope
Sent: Thursday, May 04, 2006 5:58 PM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] Seed Plate Drive

Hi Jim:

By removing this cap screw, will I have any chance of messing anything
up 
inside the final drive?  What size is this cap screw?  Thanks for your
help, 
it is appreciated!

Richard Pope
Apple Valley, CA


----- Original Message ----- 
From: "Jim Becker" <jim.becker at verizon.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Thursday, May 04, 2006 6:07 AM
Subject: Re: [Farmall] Seed Plate Drive


> Been a long time since I took one off.  As I recall, look in the end
of it 
> and you will find the head of a cap screw.  Take it out and the piece
will 
> slide off.
>
> Jim Becker        jim.becker at verizon.net
>
> ----- Original Message ----- 
> From: "Richard Pope" <popeman at verizon.net>
> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
> Sent: Thursday, May 04, 2006 6:37 AM
> Subject: [Farmall] Seed Plate Drive
>
>
> List:
>
> I need info on how to remove the "Seed plate drive" from the final
drive 
> on my Super A.  Is it threaded and just unscrews, or do I have to
perform 
> major surgery?
>
> http://img74.imageshack.us/my.php?image=p50352297er.jpg
>
> Thanks in advance,
>
> Richard Pope
> Apple Valley, CA
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 


_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall



_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall