[Farmall] Fast Hitch filler plates?

[Mike Sloane]

I very much appreciate all the excellent replies I received from Kurt, 
Jim, Mike, Al, and others. As is it happens, I started poking around the 
mower and compared the measurements of the prongs on the mower with the 
ones on the Fast Hitch drawbars, and they are the same! On closer 
inspection, it is pretty obvious that someone changed out the prongs, as 
the welds are good, but not factory done. So I guess I don't need the 
filler plates right now. But I will keep the information, in case I 
happen to acquire an implement with the smaller prongs.

Thanks to all for the excellent assistance!

Mike

Kurt Musgrave wrote:
> The filler plates I have are 1/2 inch thick,  1 3/16 inches wide and 13 1/4
> inches long.  The roll pin is 3/4 inches from one end.
> 
> Kurt
> 
>
-- 
Mike Sloane
Allamuchy NJ
<mikesloane at verizon.net>
Website: <www.geocities.com/mikesloane>
Images: <www.fotki.com/mikesloane>

"Man's capacity for justice makes democracy possible,
but man´s inclination to injustice makes democracy necessary."
Reinhold Niebuhr (1892-1971), US theologian.


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.3.1/291 - Release Date: 3/24/2006