[AT] KingKutter & QuickHitches

[charlie hill]

The only solution I can think of is to build a bracket that will bolt to the 
catagory pin hole and around the frame with a new pin that is about an inch 
or so in front of the frame.  I don't know what that will do to the geometry 
of the hitch/implement combination but you could do it in a way that it 
wouldn't be a "modification" to the implement.

Charlie
----- Original Message ----- 
From: "D. Day" <ddss at telebeep.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, March 22, 2006 5:00 PM
Subject: Re: [AT] KingKutter & QuickHitches


> The problem is that the KK frames are just wide enough that the frame is 
> too
> wide to fit inside of the hitch and not wide enough to fit on the outside.
> At least that was the case with the mower.  I haven't seen the landscape
> rake yet but my TSC guy thinks it has the same width frame.
>
>
> ----- Original Message ----- 
> From: "George Willer" <gwill at toast.net>
> To: "'Antique tractor email discussion group'"
> <at at lists.antique-tractor.com>
> Sent: Wednesday, March 22, 2006 3:46 PM
> Subject: RE: [AT] KingKutter & QuickHitches
>
>
> Dick,
>
> I seriously doubt reversing the mounting pins in the structure would void
> your warranty.  I THINK that's what you have to do if you're serious about
> using the implement.  That's a wrench job, and is easily reversible.
>
> George Willer
>
>
>> -----Original Message-----
>> From: at-bounces at lists.antique-tractor.com [mailto:at-
>> bounces at lists.antique-tractor.com] On Behalf Of D. Day
>> Sent: Wednesday, March 22, 2006 4:11 PM
>> To: at at lists.antique-tractor.com
>> Subject: [AT] KingKutter & QuickHitches
>>
>> Has anyone else experienced problems getting KingKutter 3-pt implements 
>> to
>> fit in a Cat 1 Speeco QuickHitch?  Last year I tried to buy a 6' KK mower
>> from my local TSC and had to return it because the bottom two pins were
>> too
>> wide to fit inside of my quickhitch.  I'm now looking at a 6' landscape
>> rake
>> and seem to be having the same issue with the KK rake. The customer
>> service
>> people at KK said that if I alter a KK implement in any way that I would
>> void the warranty.
>>
>> Dick
>>
>> _______________________________________________
>> AT mailing list
>> Remembering Our Friend Cecil Monson 11-4-2005
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> __________ NOD32 1.1455 (20060322) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.2.6/287 - Release Date: 3/21/2006
>
>