[AT] Case SC

[Gene Dotson]

    Doug;
    Every starter on every Case I have seen has the body of the
starter mounted to the front side of the flywheel. This would include
all tractors fron the C,L,V,D,VA,and S series from the thirties to the
70 series of the seventies. This may not include the David Brown built
tractors, as I have no experience with them.
    Had one submitter on the Case discussion board who thought his
starter turned the wrong way. It was just fine and he was looking at
it backwards..
    Many IHC tractors had starters mounted to the rear of the
flywheel, so would turn in the opposite direction as a Case starter.
Possibly putting an IHC field in a Case starter could cause it to turn
in the opposite direction, but this is outside my experience.

                    Gene



----- Original Message -----
From: "Doug Tallman" <dtallman at accnorwalk.com>
To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
Sent: Saturday, March 25, 2006 6:46 PM
Subject: Re: [AT] Case SC


: At 06:22 PM 3/25/2006 -0500, you wrote:
: >     Richard;
: >     To answer your first quesation, no, Case did not make an
engine
: >that turned in the opposite direction.
: >     As to a rebuilt starter turning the wrong direction, probably
not.
:
: if one starter was made to come into the flywheel from the front and
: another from the rear, they would have to turn opposite directions.
Did
: Case ever vary their starter location??
:
:
:                                                   Doug Tallman
:                                            dtallman at accnorwalk.com
:                                       VGTCOA Ohio Regional Director
:                                                Greenwich, OH USA
:
:
:
: _______________________________________________
: AT mailing list
: Remembering Our Friend Cecil Monson 11-4-2005
: http://www.antique-tractor.com/mailman/listinfo/at