[AT] Metal lathe question--Chuck size measurement

[George Willer]

My 13" South Bend has a L00 tapered chuck.  No threads at all, except for
the retaining ring.

George Willer

> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com [mailto:at-
> bounces at lists.antique-tractor.com] On Behalf Of Mark Greer
> Sent: Monday, March 13, 2006 12:51 AM
> To: Antique tractor email discussion group
> Subject: Re: [AT] Metal lathe question--Chuck size measurement
> 
> Those are the thread sizes where the chuck screws onto the spindle.
> Mark
> 
> ----- Original Message -----
> From: "John Wilkens" <jwilkens at eoni.com>
> To: <at at lists.antique-tractor.com>
> Sent: Saturday, March 11, 2006 7:47 PM
> Subject: [AT] Metal lathe question--Chuck size measurement
> 
> 
> > My old 13" South Bend lathe was made with either a 1 1/2" spindle or a 2
> > 1/4" spindle.  Where or what do you measure to get those dimensions?
> Mine
> > seems to be in between those two dimensions the way I measure.    John
> >
> >                     In the wide-open spaces of NE Oregon
> >
> >
> >
> > _______________________________________________
> > AT mailing list
> > Remembering Our Friend Cecil Monson 11-4-2005
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> 
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at