[AT] speaking of clutches

[Larry Marshall]

Lew,
  I don't know if it is the same as on the M or MT so this may be useless
info. There is an adjustment cam with locknut on the side of the center
frame unit directly below the sediment bowl. Loosen the locknut, then turn
the adjustment cam counter-clockwise to increase pedal free travel. All of
this directly from the service manual, I have never personally adjusted
mine.

Larry Marshall
Burnet, TX
----- Original Message -----
From: "Lew Best" <bee_keeper at earthlink.net>
To: <at at lists.antique-tractor.com>
Sent: Tuesday, March 07, 2006 7:12 PM
Subject: [AT] speaking of clutches


Hey guys

The clutch is slipping real bad on a 420 John Deere I bought recently.
One curiosity before I tear it apart is does it have any place to adjust
the pedal free play?  I haven’t found any way to adjust it & the pedal
seems to have very little if any play before it “tops out.”

Thanks!

Lew Best near Waco, TX


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.2.0/275 - Release Date: 3/6/2006

_______________________________________________
AT mailing list
Remembering Our Friend Cecil Monson 11-4-2005
http://www.antique-tractor.com/mailman/listinfo/at



--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.2.0/275 - Release Date: 3/6/2006