[Steam-engine] Suction hose

Wed Jun 21 18:18:04 PDT 2006

First I would determine what size hose will fit your ejector. The  tapers on 
mine work with 1 1/4 inches so that is what I get.  I  have tried black hose 
but it quickly deteriated in the sun, so I went to red  rubber. I use 25 feet 
of suction since I like to stop on low water  bridges.
This set up will throw a LOT of water! 
Good Luck,
Jack Hottel
Peerless 50

-------------------------------1150939084
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3DUS-ASCII">
<META content=3D"MSHTML 6.00.2900.2912" name=3DGENERATOR></HEAD>
<BODY id=3Drole_body style=3D"FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY:=20=
Arial"=20
bottomMargin=3D7 leftMargin=3D7 topMargin=3D7 rightMargin=3D7><FONT id=3Drol=
e_document=20
face=3DArial color=3D#000000 size=3D2><FONT id=3Drole_document face=3DArial=20=
color=3D#000000=20
size=3D2>
<DIV>First I would determine what size hose will fit your ejector. The=20
tapers on mine work with 1 1/4 inches so that is what I get. =
 I=20
have tried black hose but it quickly deteriated in the sun, so I went to red=
=20
rubber. I use 25 feet of suction since I like to stop on low water=20
bridges.</DIV>
<DIV>This set up will throw a LOT of water! </DIV>
<DIV>Good Luck,</DIV>
<DIV>Jack Hottel</DIV>
<DIV>Peerless 50</DIV>
<DIV> </DIV></FONT></FONT></BODY></HTML>