[AT] conventional or electronic ignition

Cecil Bearden crbearden at copper.net
Wed Jun 14 16:48:56 PDT 2006


I thought about that, It had some NGK plugs in it that crossed over to a D-8 
Champion.  I put in D-16's that I robbed from my poor little wisconsin 2 
cyl's and had to rob another 2 this last time.   I will have to special 
order something hotter than a D-16

Cecil
----- Original Message ----- 
From: "Ken Knierim" <ken.knierim at gmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, June 14, 2006 8:32 AM
Subject: Re: [AT] conventional or electronic ignition


>
> Yeah that sounds like overfueling. The carb would be my first choice
> and once you get that working to your satisfaction, you might think
> about going a little hotter on the plugs as well, depending on what
> you find.
>
> On 6/14/06, Cecil Bearden <crbearden at copper.net> wrote:
>> yep, sort of sooty black.  It is the center 2 plugs on a y69 
>> Continental....
>> I don't think I can squeeze a HEI ignition in there as it is a clark
>> Yardlift.  Pretty compact....  I may try to set the float level lower 
>> like
>> Walt suggested...
>>
>> Cecil
>> ----- Original Message -----
>> From: <pga2 at hot1.net>
>> To: "Antique tractor email discussion group" 
>> <at at lists.antique-tractor.com>
>> Sent: Wednesday, June 14, 2006 5:51 AM
>> Subject: Re: [AT] conventional or electronic ignition
>>
>>
>> >
>> > Cecil,
>> > Either a GM HEI for a 4 cylinder or a Pertronix conversion kit should 
>> > fix
>> > that fouling problem. I suspect that this is a gas engine and the 
>> > mixture
>> > is too rich. The same thing will happen to my A-C RC especially if it
>> > idles a lot.
>> > Are the plugs that foul sooty black?
>> >
>> > Phil
>> >
>> >> One of my small forklifts needs spark plugs about every 30 days.  It
>> >> always
>> >> starts missing.  It is still a 6 volt system.  It starts great, but 
>> >> just
>> >> fouls plugs even though it does not burn oil...  Should I put in a 12
>> >> volt
>> >> system with a 12v coil or is there another trick??
>> >>
>> >> Cecil in OKla
>> >
>> >
>> >
>> > _______________________________________________
>> > AT mailing list
>> > Remembering Our Friend Cecil Monson 11-4-2005
>> > http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> _______________________________________________
>> AT mailing list
>> Remembering Our Friend Cecil Monson 11-4-2005
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at 





More information about the AT mailing list