[Farmall] Converting to 12 v system on Cub

[Jim Becker]

I think in general if people put as much effort into fixing their 6-volt 
systens as it takes to convert to 12-volts, they wouldn't need to convert. 
Of course, it is easier to throw parts at a problem than to actually 
diagnose a problem.  Isn't that one of the most common complaints we see 
posted about "professional" mechanics?

Jim Becker        jim.becker at verizon.net

----- Original Message ----- 
From: "Greg Hass" <gkhass at avci.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Saturday, July 15, 2006 11:14 PM
Subject: Re: [Farmall] Converting to 12 v system on Cub



> And finally, I hate to admit this, but after I had bought the 12 volt 
> stuff and was starting to remove the 6 volt stuff I found the ground loose 
> where it fastened to the tractor