[AT] IH 666 runs lean

[Phil Auten]

Don,
Did you use any teflon tape on the threads when you reassembled it?
If so, a loose end may be partially blocking the line.

Phil

At 03:04 PM 1/23/06, you wrote:
>Earlier this winter I had to change out the fuel cutoff solenoid on 
>my snowblower tractor, an IH 666 gas gear drive.  I have to have 1/3 
>to 1/2 choke on to keep it running.  I have checked the float 
>setting and the idle adjustment.  Both are working correctly and no 
>choke is required for slow idle, but it still must be choked to keep 
>running at fast idle.
>
>Any of you IH and/or carb gurus got any good 
>suggestions.   Fortunately we haven't had much additional snow lately....
>
>Don
>Don Thiel                       <mailto:dwt at rrt.net>