[AJD] Need Help on the Governor for a G

[Duane Larson]

Bill,
Robert's Carb Repair  www.robertscarbrepair.com  sells a nice video which 
details how to overhaul a governor.  I would suggest you order a copy as it 
will save you time and headache.  It shows how to remove all bearings, etc., 
how to rebuild the weights, etc.  The only thing it leaves out which I do is 
refacing the end of the sleeve where the weight arms push against, and that 
surface has to be ground as it is very hard.
Duane Larson

----- Original Message ----- 
From: "bill gray" <billgrayalt at yahoo.com>
To: <antique-johndeere at lists.antique-tractor.com>
Sent: Monday, January 16, 2006 10:45 PM
Subject: [AJD] Need Help on the Governor for a G


>  Can someone give me some pointers on disassembling the governor assembly 
> on a late model G?  I need to replace the thrust bearing and while I am at 
> it I thought I would replace the rest of the bearings.  I am trying to 
> find a good way of reacting the distributor/magneto drive flange to press 
> the shaft out. If I press against the fan drive gear I will be applying 
> the force to the spring instead of the flange. I have an old I&T Shop 
> Manual and they say to remove the flange using an O.T.C Puller but I am 
> not sure what that is.  Any help would be appreciated.
>
>
>
> Bill Gray
> Tifton 44 Bermuda Hay Operations
> In Use John Deere 4000 and  430W
> Rework in Progress John Deere 430T, Styled G
>
>
>
>
>
> ---------------------------------
> Yahoo! Photos
> Ring in the New Year with Photo Calendars. Add photos, events, holidays, 
> whatever.
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere