[AJD] Oil seal for JD LA belt pulley

[Paul O]

John

Good advice about the seals.

I also did not know that you have L and LA parts. (maybe it doesn't matter, 
I cannot remember the last time I did anything with the little ones)

Paul O

----- Original Message ----- 
From: "John Boehm" <rustyacres at yahoo.com>
To: "Antique John Deere mailing list" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Thursday, January 19, 2006 9:19 AM
Subject: RE: [AJD] Oil seal for JD LA belt pulley


>
> Most likely it will cross over with a new CR seal
> still available from Chicago Rawhide. If you find the
> original equipment manufacturer's number (which may
> not be possible in your case), you can check the
> Chicago Rawhide webite to find currently available
> seals that will work. The website is
> http://www2.chicago-rawhide.com/. If that does not
> work, you should be able to take the old seal along
> with the pulley housing and shaft to a good bearings
> supply house and they should be able to measure the
> shaft and housing or even the old seal to find a new
> seal that will work for your application. Sometimes
> the older seals are wider than available replacements,
> but it may be possible to use two of the new, narrower
> seals in place of the old seal.
>
> Also, I find it curious that Dean refers you to
> someone off list for LA parts or questions, when I
> specialize in supplying L and LA parts, having parted
> over 50 of them in the past few years.
>
> John Boehm
> Woodland, CA
> Visit my web site at http://vintagetractors.com
>
>
>
> --- Dean VP <deanvp at att.net> wrote:
>
>> Mr. Fry:
>>
>> I have a couple suggestions in case you haven't
>> tried these:
>>
>> 1.) Have your local JD dealer and have them do a
>> Nationwide dealer search on
>> the part number. JD dealer internal stock, other
>> than your own dealers
>> stock, doesn't show up on www.jdparts.deere.com.
>>
>> 2.) Check out Ridenour's. They are very prominent JD
>> L collectors and sell
>> parts. If they don't have any they may know where to
>> find it or have a cross
>> reference to it.
>>
>> http://my.ohio.voyager.net/~dlride/
>>
>>
>>
>> Dean A. Van Peursem
>> Snohomish, WA 98290
>>
>> Forbidden fruits create many jams!
>>
>> www.deerelegacy.com
>>
>> http://members.cox.net/classicweb/email.htm
>>
>>
>>
>> -----Original Message-----
>> From:
>> antique-johndeere-bounces at lists.antique-tractor.com
>>
> [mailto:antique-johndeere-bounces at lists.antique-tractor.com]
>> On Behalf Of H.
>> Fry
>> Sent: Tuesday, January 17, 2006 5:54 PM
>> To: Antique John Deere mailing list
>> Subject: [AJD] Oil seal for JD LA belt pulley
>>
>> Finally found a belt pulley assembly for my '44 LA.
>> Needs a new outer seal,
>> JD part no. AL 2124 T.   Have plugged this number
>> into the JD parts finder,
>> but it calls it an invalid no.   The old seal is
>> pretty buggered up and I
>> can't read the markings on it.
>> Anyone have a replacement part no. or a source for
>> this seal?
>>
>> Some pictures of our LA's at
>> http://public.fotki.com/bald/john_deere_las/
>>
>> Thanks, H. Fry
>> Southeast Georgia
>>
>>
>>
>> _______________________________________________
>> Antique-johndeere mailing list
>>
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>
>>
>>
>> _______________________________________________
>> Antique-johndeere mailing list
>>
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>