[AJD] Oil seal for JD LA belt pulley

Dean VP deanvp at att.net
Thu Jan 19 07:31:38 PST 2006


John:

Sorry. I didn't realize this list was a commercial referral service.

Dean A. Van Peursem
Snohomish, WA 98290

Forbidden fruits create many jams!

www.deerelegacy.com

http://members.cox.net/classicweb/email.htm



-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf Of
John Boehm
Sent: Thursday, January 19, 2006 6:19 AM
To: Antique John Deere mailing list
Subject: RE: [AJD] Oil seal for JD LA belt pulley

Most likely it will cross over with a new CR seal
still available from Chicago Rawhide. If you find the
original equipment manufacturer's number (which may
not be possible in your case), you can check the
Chicago Rawhide webite to find currently available
seals that will work. The website is
http://www2.chicago-rawhide.com/. If that does not
work, you should be able to take the old seal along
with the pulley housing and shaft to a good bearings
supply house and they should be able to measure the
shaft and housing or even the old seal to find a new
seal that will work for your application. Sometimes
the older seals are wider than available replacements,
but it may be possible to use two of the new, narrower
seals in place of the old seal.

Also, I find it curious that Dean refers you to
someone off list for LA parts or questions, when I
specialize in supplying L and LA parts, having parted
over 50 of them in the past few years.

John Boehm
Woodland, CA
Visit my web site at http://vintagetractors.com



--- Dean VP <deanvp at att.net> wrote:

> Mr. Fry:
> 
> I have a couple suggestions in case you haven't
> tried these:
> 
> 1.) Have your local JD dealer and have them do a
> Nationwide dealer search on
> the part number. JD dealer internal stock, other
> than your own dealers
> stock, doesn't show up on www.jdparts.deere.com.
> 
> 2.) Check out Ridenour's. They are very prominent JD
> L collectors and sell
> parts. If they don't have any they may know where to
> find it or have a cross
> reference to it.
> 
> http://my.ohio.voyager.net/~dlride/
> 
>  
> 
> Dean A. Van Peursem
> Snohomish, WA 98290
> 
> Forbidden fruits create many jams!
> 
> www.deerelegacy.com
> 
> http://members.cox.net/classicweb/email.htm
> 
> 
> 
> -----Original Message-----
> From:
> antique-johndeere-bounces at lists.antique-tractor.com
>
[mailto:antique-johndeere-bounces at lists.antique-tractor.com]
> On Behalf Of H.
> Fry
> Sent: Tuesday, January 17, 2006 5:54 PM
> To: Antique John Deere mailing list
> Subject: [AJD] Oil seal for JD LA belt pulley
> 
> Finally found a belt pulley assembly for my '44 LA. 
> Needs a new outer seal,
> JD part no. AL 2124 T.   Have plugged this number
> into the JD parts finder,
> but it calls it an invalid no.   The old seal is
> pretty buggered up and I
> can't read the markings on it.
> Anyone have a replacement part no. or a source for
> this seal?
> 
> Some pictures of our LA's at
> http://public.fotki.com/bald/john_deere_las/
> 
> Thanks, H. Fry
> Southeast Georgia
> 
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
>
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
>
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 

_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere





More information about the AT mailing list