[AJD] Help Identify What These Parts Are For

[Luke Tonneberger]

Wow, that was fast! Must not have been that
challenging :-) Thanks Dean. Are these things even
worth listing on Ebay? I'd start them off at .50 cents
or something I guess. They aren't any good to me.

Luke Tonneberger
Rockford, Michigan
USA

--- Dean VP <deanvp at att.net> wrote:

> Luke:
> 
> JD 2752 subs to JD3731 AND WAS USED ON A SULKY RAKE.
> It appears to me to be
> a wheel end cap. 
> 
> A845R subs to AA525R and was used on a certain
> serial number range of
> unstyled Model A's (35-39). And is called an upper
> water pipe. It is not the
> complete original assembly however as the pipe has
> been cut off.
> 
> G801A was used on various plows such as the 55, 56,
> 555 and F610 used from
> 1950 on. It is the upper tail wheel axle sleeve and
> bearing. DA181A is a
> substitute for it.
> 
> Hope this helps.
> 
> Dean A. Van Peursem
> Snohomish, WA 98290
> 
> Forbidden fruits create many jams!
> 
> www.deerelegacy.com
> 
> http://members.cox.net/classicweb/email.htm
> 
> 
> 
> -----Original Message-----
> From:
> antique-johndeere-bounces at lists.antique-tractor.com
>
[mailto:antique-johndeere-bounces at lists.antique-tractor.com]
> On Behalf Of
> Luke Tonneberger
> Sent: Tuesday, January 17, 2006 7:35 AM
> To: antique-johndeere at lists.antique-tractor.com
> Subject: [AJD] Help Identify What These Parts Are
> For
> 
> Hi Everyone,
> 
> I have a few John Deere parts laying around that I'm
> not sure what they are for or what they go to. I
> have
> no need for them so will be putting them on Ebay.
> I'd
> like to be able to describe what they are for. I'm
> wondering if anybody here would have any ideas? They
> are:
> 
> #1
>
http://www.oldengine.org/members/luket/temp/MVC-314S.jpg
>
http://www.oldengine.org/members/luket/temp/MVC-316S.jpg
>
http://www.oldengine.org/members/luket/temp/MVC-317S.jpg
> 
> Looks like some sort of cap for a wheel. Casting
> numbers of JD 2752.
> 
> #2
>
http://www.oldengine.org/members/luket/temp/MVC-321S.jpg
>
http://www.oldengine.org/members/luket/temp/MVC-322S.jpg
>
http://www.oldengine.org/members/luket/temp/MVC-323S.jpg
> 
> Looks like some sort of exhaust flange. Casting
> number
> of A845R.
> 
> #3
>
http://www.oldengine.org/members/luket/temp/MVC-325S.jpg
>
http://www.oldengine.org/members/luket/temp/MVC-327S.jpg
>
http://www.oldengine.org/members/luket/temp/MVC-328S.jpg
>
http://www.oldengine.org/members/luket/temp/MVC-329S.jpg
> 
> Looks like a steering rod would pass through it.
> Casting number of G801-A. Also has a "4" and a "U"
> stamped on the opposite side.
> 
> Any help would be appreciated.
> 
> Luke Tonneberger
> Rockford, Michigan
> USA

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com