[AT] Sandblasting safety

[Louis Spiegelberg]

I found a dealer locally that has Black Beauty.  It costs $8/100 lb bag.
That is less than sand.  I am going to give it a try.  They also claim it
cuts faster than sand.

Lou

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie hill
Sent: Friday, January 06, 2006 7:52 AM
To: Antique tractor email discussion group
Subject: Re: [AT] Sandblasting safety


Lou,

For the amount you use paying a little extra and buying it close is a 
reasonable decision.  When we are blasting we are using anywhere from 20 to 
100 bags a day.  At that rate you have to buy it as cheap as you can.  We 
make a similar trade off.  We could buy it a lot cheaper in bulk but then it

is necessary to keep a fork lift on the job.
The 100 lb bags can be handled by hand.  I'd rather pay men than equipment.

Charlie
----- Original Message ----- 
From: "Louis" <louis at kellnet.com>
To: "'Antique tractor email discussion group'" 
<at at lists.antique-tractor.com>
Sent: Friday, January 06, 2006 7:26 AM
Subject: RE: [AT] Sandblasting safety


> Thanks guys!  I am paying $6/ 50 lb bag for sand.  I can get it for
> $5/80lb
> bag, but I have to drive an extra 30 miles.  I don't like handling 80 lb
> bags or want to drive the extra distance, I have to consider what my time 
> is
> worth.  The sand that I buy is nice, I don't have to screen it, and 3 
> 50/lb
> bags fill my blaster up.
>
> I have thought about Black Beauty in the past, but assumed that it 
> cost to much.  I see through this post that it is reasonable.  I am 
> going to try to find it locally.  I think it is worth it from the 
> health aspect.  I use a supplied air respirator, but I know a guy who 
> always blasted with sand and used  a respirator and still got 
> silicosis.
>
> Lou
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Louis
> Spiegelberg
> Sent: Thursday, January 05, 2006 6:55 PM
> To: 'Antique tractor email discussion group'
> Subject: RE: [AT] Sandblasting safety
>
>
> What is the average cost of a 50 lb bag of Black Beauty?
>
> Lou
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie 
> hill
> Sent: Thursday, January 05, 2006 8:03 AM
> To: Antique tractor email discussion group
> Subject: Re: [AT] Sandblasting safety
>
>
> I agree with you Jim.  The black stuff works well and only cost about 
> 20% more than sand.  Just make sure you buy good name brand black 
> stuff like "Black Beauty".  I've known of cheap, bulk blast media 
> being highly lead contaminated.
>
> Charlie
> ----- Original Message -----
> From: "Jim and Lyn Evans" <jevans at evanstoys.com>
> To: "'Antique tractor email discussion group'"
> <at at lists.antique-tractor.com>
> Sent: Wednesday, January 04, 2006 9:36 PM
> Subject: RE: [AT] Sandblasting safety
>
>
>>I use the black blast stuff.  It is casting slag and is much sharper 
>>than  silicon sand.  It doesn't cost a whole lot more than sand if you 
>>have to  buy  it by the bag.  Also, since my air compressor is 
>>limited, the sharper and  quicker the media removes paint and rust, 
>>the better.  Go get some no fog stuff for glasses to put on your hood.  
>>It is not  perfect, but it does help.  I have a terrible time with 
>>both my hood and  my  eye glasses fogging up, especially when trying 
>>to wear a particle mask.
>>
>> Jim
>>
>> -----Original Message-----
>> From: at-bounces at lists.antique-tractor.com
>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of John Hall
>> Sent: Wednesday, January 04, 2006 7:15 PM
>> To: Antique tractor email discussion group
>> Subject: [AT] Sandblasting safety
>>
>> Bought a sandblaster a while back. I noticed the instructions say not 
>> to use
>> sand. I am assuming the lawyers are dictating this. Without holding any 
>> of
>> you liable, what type of respirator should I use so I can "safely" use
>> sandblasting sand? For the record I only plan to blast to clean up 
>> tractor
>> parts, not to do it 40 hours a week to make a living. Maybe for 2-4 hours
>> at
>> a time on a Saturday.
>>
>> Also, When it is cool outside, mid 50's or lower, I have a problem 
>> with the
>> hood fogging up on the inside when I wear a particle mask. Would a paint
>> respirator solve this?
>>
>> John Hall
>>
>>
>> _______________________________________________
>> AT mailing list
>> Remembering Our Friend Cecil Monson 11-4-2005 
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> Remembering Our Friend Cecil Monson 11-4-2005 
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.371 / Virus Database: 267.14.13/221 - Release Date: 
>> 1/4/2006
>>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005 
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005 
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005 
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.371 / Virus Database: 267.14.14/222 - Release Date: 1/5/2006
>
> 

_______________________________________________
AT mailing list
Remembering Our Friend Cecil Monson 11-4-2005
http://www.antique-tractor.com/mailman/listinfo/at