[AT] Rivet how-to

[Cecil Bearden]

Drill a small hole thru th rivet first to relieve the internal pressure It 
should come out "fairly" easily..

Cecil in Okla
----- Original Message ----- 
From: "John Hall" <jthall at worldnet.att.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Sunday, February 05, 2006 6:16 AM
Subject: Re: [AT] Rivet how-to


>
> Well it seems I'll be in the tool making business. While hydraulics would 
> be the easiest, I'll have to stick with something with a bolt for 
> compression. Hopefully a 3/4 air wrench will do this as I have lots to do. 
> I did notice yesterday afternoon the front wheels have different rivets.
> got to thinking that removing these things might be fun. At first I was 
> thinking about just torching the heads, but if the rivets are swaged in 
> the hole, it's gonna get interesting.
>
> Thanks for all the input fellows, I'll let you know how this turns out.
>
> John
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at