[AT] Huber info

[D. Day]

Thanks John, I'll call them tomorrow.

Dick

----- Original Message ----- 
From: "JParks" <jkparks at flash.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Saturday, February 11, 2006 10:16 AM
Subject: Re: [AT] Huber info


Dick

let me know if these turn out bad...they are a little bit dated.
some numbers I have collected in the past, which may or may not still be
good (no one let's me know after I pass them out!)

Equip. Salvage 614 439 5512

Douglas Equip 717 428 1517

Huber Construction 209 830 8600

I hope these help!

John Parks

Boise, ID

----- Original Message -----
From: "D. Day" <ddss at telebeep.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Saturday, February 11, 2006 8:36 AM
Subject: Re: [AT] Huber info


> John, thanks for the reply.  Yes, checked with Jensales and I even monitor
> eBay for any new Huber manuals.
>
> I'll keep looking.
>
> Dick
>
> ----- Original Message -----
> From: "John Hall" <jthall at worldnet.att.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Saturday, February 11, 2006 5:54 AM
> Subject: Re: [AT] Huber info
>
>
> Wish I could help  you other than to say I know where one of those is,
> although I'm not certain of the model. I think the one I know of has a
front
> mounted bucket. Can't remember if you have to stand up and drive or if it
> had a seat. Personally I think one would make a great display at a tractor
> pull grading the track, although I'm sure it would take some real skill to
> do it! I'd love to have one here for maintaining the farm road.
>
> Have you tried Jensales for manuals?
>
> John Hall
> ----- Original Message -----
> From: "D. Day" <ddss at telebeep.com>
> To: <at at lists.antique-tractor.com>
> Sent: Friday, February 10, 2006 11:04 PM
> Subject: [AT] Huber info
>
>
> > I've just started restoring a 1946 Huber M-120 maintainer and am looking
> > for
> > any information I can find on it. After 2 years of searching, I have
been
> > unable to locate anyone else who owns an M-120.  I've found others who
own
> > the M-150 and newer maintainers, but no dice on finding M-120 owners.
> >
> > The Huber museum was able to help me find a parts manual but I can't
seem
> > to
> > find the owner's or service manual.
> >
> > If anyone knows anything about the M-120 or knows someone who owns one,
> > I'd
> > sure appreciate hearing from you.
> >
> > Thanks!
> >
> > Dick
> >
> > Dick Day Software Services
> > 83712 552nd Avenue
> > Norfolk, NE 68701
> >
> > 402-379-1606
> >
> > _______________________________________________
> > AT mailing list
> > Remembering Our Friend Cecil Monson 11-4-2005
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> __________ NOD32 1.1403 (20060210) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at


_______________________________________________
AT mailing list
Remembering Our Friend Cecil Monson 11-4-2005
http://www.antique-tractor.com/mailman/listinfo/at


__________ NOD32 1.1403 (20060210) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com