[AJD] LA axles

[wwwayne johnson]

Tommy,
I have a shop manual for the 420 and will be glad to copy appropriate pages 
and send them to you.  The manual shows a portapower shoting through the 
hole and pressing on the end of the axle.  I did not need this with my 40 or 
420.  Placed a piece of brass bar stock in the hole and hit it a good lick 
and the axles came out rather easily.  I'm sure you removed the bolt and 
retainer plate.  Send me your mailing address and I'll shoot some pages to 
you.
Merle Wayne   wjohnson at bigriver.net
----- Original Message ----- 
From: <TSmith1499 at aol.com>
To: <antique-johndeere at lists.antique-tractor.com>
Sent: Wednesday, February 01, 2006 9:25 PM
Subject: Re: [AJD] LA axles


> Okay, I know you guys are just having a ball laughing at this  newbie.
>
> I got the axle out. Now how the heck do I get the bull gear out?  It  will
> come about 3/4 of the way out and wont go any further. I sure wish Mother 
> Deere
> would have made a shop manual for this little gem.  Thanks again,
>
> Tom &  Beth Smith
> Mount Airy, MD.
> Tsmith1499 at aol.com
> 1942 JD LA
> 1945  Unstyled AR
> 1957 720D Standard
> 1959 JD 435
> 1961 JD 3010
> 1969 JD 55  Combine
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
>