[AT] live pto for fords (Now JDs)

[jfgrant]

Greg, being a John Deere type I happen to have at least, the pulley that 
bolted to the flywheel for this type of operation. Interesting concept at 
that time. John Grant  east of Lansing Michigan
----- Original Message ----- 
From: "Greg Hass" <gkhass at avci.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, February 01, 2006 7:10 PM
Subject: Re: [AT] live pto for fords (Now JDs)


>I am an IH kind of guy, but quite a few years ago I saw an ad with a kit to 
>provide live power to the "styled" JDs.  I cannot remember all the details 
>(such as how they turned it on and off), but basically it used a V-belt 
>pulley that bolted to the flywheel and a V-belt went along the left side of 
>the tractor to the rear, then went around 2 idler pulleys at a 90 degree 
>angle and around a pulley on the PTO shaft.  Not sure how much power this 
>system was supposed to transmit.  Never saw one in person, but saw several 
>ads for it.  I have, however, seen a conversion kit made for IH Hs and Ms 
>to provide them with live power and was told by the owner that it works 
>great.
>
> Greg Hass
> From the tip of Michigan's Thumb
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>