[AT] WD Starter drive

[D. Day]

Charlie, I looked that the ring and I don't see any broken teeth and they 
all look ok to me. But, since I've never seen a new one, I'm not totally 
sure how much rounding is ok.  The edges look fairly sharp.

Dick


----- Original Message ----- 
From: "charlie hill" <chill8 at cox.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Thursday, August 17, 2006 7:01 AM
Subject: Re: [AT] WD Starter drive


Are the teeth on the flywheel ring worn off on the edge toward the starter?

Charlie
----- Original Message ----- 
From: "D. Day" <ddss at telebeep.com>
To: <at at lists.antique-tractor.com>
Sent: Wednesday, August 16, 2006 9:12 PM
Subject: [AT] WD Starter drive


> The inside collar was broken on the starter drive on my WD (parts were
> loose
> down inside the spring), which I assumed would account for the
> intermittent
> starter problems (starter would grind or just spin without engaging the
> flywheel).   I ordered a new starter drive, installed it and now it's the
> same or worse.
>
> Other than aligning and tightening the set screw on the inside collar of
> the
> new starter drive, I cannot see where there is any other alignment or
> adjustment.  Am I missing something?  The teeth on the flywheel, at least
> to
> the untrained eye, do not look damaged or worn.  The starter motor is
> turning quickly.
>
> Any suggestions?
>
> Thanks
>
> Dick
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.10.10/419 - Release Date: 8/15/2006
>
>

_______________________________________________
AT mailing list
Remembering Our Friend Cecil Monson 11-4-2005
http://www.antique-tractor.com/mailman/listinfo/at


__________ NOD32 1.1711 (20060817) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com