[Farmall] Farmall 340 Loader Question

[Mike Sloane]

Taking those "skirts" off isn't all that big a deal, if the screws 
haven't all rusted. I removed all of what was left of mine, cleaning out 
the threads with a tap and replaced all the screws with new ones that I 
got from MSC <www.mscdirect.com> - they were close to original but not 
exact. I had to locate replacement skirts to fill the gaps. I also put 
Nev-R-Seize on all the threads, so when I have to take it apart again, 
it will be a lot easier. <http://public.fotki.com/mikesloane/farmall_340/>

Mike

Larry Hardesty wrote:
> Jim,  Yes, that it what it is.  I took the piece into Case-IH yesterday.
> The parts fellow recognized it pretty quickly.  Of course, I had to purchase
> the entire joint.  Next task is find time to take the sheet metal off around
> the dash and replace the piece.  Ain't old tractors fun!!
> 
> Thanks for responding and confirming.
> 
> Larry
> 

-- 
Mike Sloane
Allamuchy NJ
<mikesloane at verizon.net>
Website: <www.geocities.com/mikesloane>
Images: <www.fotki.com/mikesloane>

Ignorance, allied with power, is the most ferocious
enemy justice can have. -James Baldwin, writer (1924-1987)


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.1/421 - Release Date: 8/16/2006