[AT] JD 60 manifold gasket

[Richard Fink Sr]

Walt why do they make copper spray sealant [that says on the can for 
exhaust and head gaskets[ then. Don't want to get in a pissing battle but 
have used it and still do. You can put on several coats to help seal flaws.
R Fink
PA



At 11:22 PM 4/29/2006 -0400, you wrote:
>Farmer,   In case you don't understand here is the simple facts  for you.
>Exhaust manifolds get very, very hot,hot enough to melt some  metals I 
>have seen
>them red hot that will melt lots of metals. Exhaust gaskets  are made to
>withstand these very hot temperatures that why you don't use 
>gasket  sealers and
>such on them as they get hot and burn off leaving the system  unprotected. If
>you thinks that's nonsense then be my guest and use them all you  want.
>
>
>Walt  Davies
>Cooper Hollow Farm
>Monmouth, OR 97361
>503 623-0460
>
>_______________________________________________
>AT mailing list
>Remembering Our Friend Cecil Monson 11-4-2005
>http://www.antique-tractor.com/mailman/listinfo/at