[AT] JD 60 manifold gasket

Fri Apr 28 16:18:34 PDT 2006

Check the manifold with a straight edge. If it is warped then take it to 
a machine shop to be trued up. Install it with a new gasget and enjoy it 
for the next 40 years.

Ken Knierim wrote:
> About the only thing to do now would be to replace the gasket.
> 
> I fought issues like that on headers on a Camaro for quite a while...
> and found that smearing some of that Ultra Copper silicone sealant on
> both sides of the gasket before I torqued things down seemed to help a
> lot. If you let it set up properly (like overnight) it seems to help