[AT] rain; now Grain Drill

John Hall jthall at worldnet.att.net
Wed Apr 26 19:24:51 PDT 2006


I've only been there once. I was building a sprayer. All I needed was a 
shopping list and a check and I was in business!!

Drill has been updated with new springs and a new hole drilled so we can 
increase the pressure. Very noticable difference. And most importantly we 
have had 3 showers of 1/2" each!!

John
----- Original Message ----- 
From: "charlie hill" <chill8 at cox.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, April 25, 2006 8:47 PM
Subject: Re: [AT] rain; now Grain Drill


> Yeah I figure  it's a long shot but they sure have a big pile of that type 
> hardware lying around in their stores.    Good luck finding what you need.
>
> Charlie
> ----- Original Message ----- 
> From: "John Hall" <jthall at worldnet.att.net>
> To: "Antique tractor email discussion group" 
> <at at lists.antique-tractor.com>
> Sent: Tuesday, April 25, 2006 6:46 PM
> Subject: Re: [AT] rain; now Grain Drill
>
>
>> Hadn't tried them but I would surprised if they had them. I am restricted 
>> by OD and ID--makes it hard to come up with a substitute--especially when 
>> figuring OAL, collapsed height, and rate..
>>
>> At least the new ones I got from AGCO are made in the USA. I'm getting 
>> more disgusted with the quality of the crap we keep importing from China. 
>> Just put a set of brake bands in a Cub. The linings had air gaps between 
>> them and the bands and the radius wasn't even remotely close. Rest 
>> assured they didn't come from Case-IH.
>>
>> John
>>
>> ----- Original Message ----- 
>> From: "charlie hill" <chill8 at cox.net>
>> To: "Antique tractor email discussion group" 
>> <at at lists.antique-tractor.com>
>> Sent: Monday, April 24, 2006 8:14 PM
>> Subject: Re: [AT] rain; now Grain Drill
>>
>>
>>> John,
>>>
>>> Have you tried Agri-Supply?   WWW.agri-supply.com
>>>
>>> ----- Original Message ----- 
>>> From: "John Hall" <jthall at worldnet.att.net>
>>> To: "Antique tractor email discussion group" 
>>> <at at lists.antique-tractor.com>
>>> Sent: Monday, April 24, 2006 6:30 PM
>>> Subject: Re: [AT] rain; now Grain Drill
>>>
>>>
>>>> Herb,
>>>> I've been using Century spring lately---they have  a lot of stock 
>>>> springs but nothing to fit my application. I checked on getting some 
>>>> customs made but the price is about half what a factory conversion to 
>>>> dual springs would be. So I opted to replace teh old ones with new ones 
>>>> and increase the amount of tension. I'll shorten my maximum travel by 1 
>>>> inch but if I push the opener up that much, something else is probably 
>>>> already broken.
>>>>
>>>> Back when we could afford to full till farm none of this was a problem. 
>>>> Just a minor drawback to no-till, I still prefer it over tillage 
>>>> though.
>>>>
>>>> John
>>>>
>>
>>
>> _______________________________________________
>> AT mailing list
>> Remembering Our Friend Cecil Monson 11-4-2005
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.385 / Virus Database: 268.4.6/323 - Release Date: 4/24/2006
>>
>>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
> 





More information about the AT mailing list