[Farmall] Fw: voltage regulator on a Farmall 100

[James Moran]

K-
  Check that all of your terminals are "down tight" and that the ground is firmly in place.
  JM

Karl and Doris Bittenbender <kdbitten at crocker.com> wrote:  Is this where I should have sent the message below.  I got it back as
undeliverable or unacceptable.
Please advise.
Thanks
Karl
----- Original Message ----- 
From: "Karl and Doris Bittenbender" 
To: 
Sent: Sunday, April 23, 2006 12:17 PM
Subject: voltage regulator on a Farmall 100


> Is this where I should pose a question about how to get my charging system
> running correctly.  I am not having too much luck navigating the web site.
> In reading Roger Welsch's TORQUING, he thinks you folks walk on water
> relative to good information.  That's what I am looking for but haven't
> figured out how to connect.  I did subscribe but can figure out where to
as
> a question.  Is that what the bulletin board is for.  If so how do I use
it?
> My problem is that I have  installed a new charger and voltage regulator
on
> a ??1947?? Farmall 100 and it charges intermittently, usually if I rap the
> regulator gently with a pair of pliers.  It will charge for five to ten
> seconds and fall off to discharge.  Clearly not good for the battery.
> Please advise.  In advance, my apologies for not understanding the system.
> Thanks
> Karl
>

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall


		
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates starting at 1¢/min.
--0-509468099-1145827780=:3652
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

K-<br>  Check that all of your terminals are "down tight" and that the ground is firmly in place.<br>  JM<br><br><b><i>Karl and Doris Bittenbender <kdbitten at crocker.com></i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">  Is this where I should have sent the message below.  I got it back as<br>undeliverable or unacceptable.<br>Please advise.<br>Thanks<br>Karl<br>----- Original Message ----- <br>From: "Karl and Doris Bittenbender" <kdbitten @crocker.com=""><br>To: <antique-tractor @atis.net=""><br>Sent: Sunday, April 23, 2006 12:17 PM<br>Subject: voltage regulator on a Farmall 100<br><br><br>> Is this where I should pose a question about how to get my charging system<br>> running correctly.  I am not having too much luck navigating the web site.<br>> In reading Roger Welsch's TORQUING, he thinks you folks walk on water<br>> relative to good information.  That's what I am looking
 for but haven't<br>> figured out how to connect.  I did subscribe but can figure out where to<br>as<br>> a question.  Is that what the bulletin board is for.  If so how do I use<br>it?<br>> My problem is that I have  installed a new charger and voltage regulator<br>on<br>> a ??1947?? Farmall 100 and it charges intermittently, usually if I rap the<br>> regulator gently with a pair of pliers.  It will charge for five to ten<br>> seconds and fall off to discharge.  Clearly not good for the battery.<br>> Please advise.  In advance, my apologies for not understanding the system.<br>> Thanks<br>> Karl<br>><br><br>_______________________________________________<br>Farmall mailing list<br>http://www.antique-tractor.com/mailman/listinfo/farmall<br></antique-tractor></kdbitten></blockquote><br><p>
		<hr size=1>Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. <a href="http://us.rd.yahoo.com/mail_us/taglines/postman7/*http://us.rd.yahoo.com/evt=39666/*http://beta.messenger.yahoo.com"> Great rates starting at 1¢/min.