[AJD] front wheels
Duane Larson
jdlarson at comcast.net
Thu Apr 6 06:22:13 PDT 2006
Mitch,
With Roll-a-Matic you would want the JD1274R reversible wheels.
Duane
----- Original Message -----
From: "Mitchell Daly" <md31043 at msn.com>
To: "Antique John Deere mailing list"
<antique-johndeere at lists.antique-tractor.com>
Sent: Thursday, April 06, 2006 7:56 AM
Subject: Re: [AJD] front wheels
Duane,
Thanks for the reply. I'm looking at the G parts book, PC369, that is
included on the CD. I also have hard copy of it. I'm getting the numbers
from page 102, item 6. The 1275R is listed up to serial# G20277 and the
1290R shows being used after #G20278. My concern is the proper front rim
considering the Roll-A-Matic front end.
Mitch
----- Original Message -----
From: Duane Larson<mailto:jdlarson at comcast.net>
To: Antique John Deere mailing
list<mailto:antique-johndeere at lists.antique-tractor.com>
Sent: Thursday, April 06, 2006 12:43 AM
Subject: Re: [AJD] front wheels
Mitch,
Might you mean JD1274R rims and not JD1275R? The JD1274R are a heavy duty
version of the JD1268R used on the A, and both the 74 and 68 are
reversible.
G/GM from (5-12)/41 thru 20277 used the JD1261R non reversible wheels, and
these were followed by the reversible JD1272R wheels/hubs for a short time
before 1948 - GM20582 has these rims. They were replaced by the JD1274R
reversible wheels, used from about 20278 to end of G production. I guess
the JD1275R would be a heavy duty version of the JD1261R wheels. Out of
curiosity, which parts book lists the JD1275R wheel for the G?
JD1290R wheels didn't come into use until the late '50's - on the 20
series
as I recall, and never came on a G.
Regards,
Duane
----- Original Message -----
From: "Mitchell Daly" <md31043 at msn.com<mailto:md31043 at msn.com>>
To: "Antique John Deere mailing list"
<antique-johndeere at lists.antique-tractor.com<mailto:antique-johndeere at lists.antique-tractor.com>>
Sent: Wednesday, April 05, 2006 8:28 PM
Subject: [AJD] front wheels
Duane,
In reading your post to Tommy Wilson about the proper rims he needs, I
started to think about the front rims for my GM. Now this GM is a little
strange in that it is a 1946 and has been equipped with a lot of the later
G
parts such as a water pump and Roll-A-Matic front end. The rims that came
on it are definitely dished the wrong way and a side comment by a
knowledgeable friend said that they are A rims. The parts book calls for
the JD1275R rims by the serial number, but with the Roll-A-Matic, should I
be going after the JD1290R rims? Surprisingly, I have found a set of the
JD1275R rims.
Mitch Daly
md31043 at msn.com<mailto:md31043 at msn.com<mailto:md31043 at msn.com<mailto:md31043 at msn.com>>
------=extPart_000_00B0_01C658EF.904DBE80
Content-Type: text/html;
charset=so-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content=text/html;charset=iso-8859-1>
<STYLE></STYLE>
<META content="MSHTML 6.00.2800.1528" name=GENERATOR></HEAD>
<BODY id=MailContainerBody
style="PADDING-LEFT: 10px; FONT-WEIGHT: normal; FONT-SIZE: 12pt; COLOR:
#000000; BORDER-TOP-STYLE: none; PADDING-TOP: 15px; FONT-STYLE: normal;
FONT-FAMILY: Bookman Old Style; BORDER-RIGHT-STYLE: none;
BORDER-LEFT-STYLE:
none; TEXT-DECORATION: none; BORDER-BOTTOM-STYLE: none"
leftMargin=0 topMargin=0 acc_role="text" CanvasTabStop="true"
name="Compose message area"><!--[gte IE 5]><?xml:namespace prefix="v"
/><?xml:namespace prefix="o" /><![endif]-->
<DIV>Duane,</DIV>
<DIV>In reading your post to Tommy Wilson about the proper rims he needs,
I
started to think about the front rims for my GM. Now this GM is a
little
strange in that it is a 1946 and has been equipped with a lot of the later
G
parts such as a water pump and Roll-A-Matic front end. The rims that
came
on it are definitely dished the wrong way and a side comment by a
knowledgeable
friend said that they are A rims. The parts book calls for the
JD1275R
rims by the serial number, but with the Roll-A-Matic, should I be going
after
the JD1290R rims? Surprisingly, I have found a set of the JD1275R
rims.</DIV>
<DIV> </DIV>
<DIV>Mitch Daly</DIV>
<DIV><A title=mailto:md31043 at msn.com
href="mailto:md31043 at msn.com">md31043 at msn.com</A></DIV></BODY></HTML<mailto:md31043 at msn.com">md31043 at msn.com</A></DIV></BODY></HTML>>
_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere<http://www.antique-tractor.com/mailman/listinfo/antique-johndeere>
_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere<http://www.antique-tractor.com/mailman/listinfo/antique-johndeere>
------=extPart_000_003F_01C6594F.A33D9B90
Content-Type: text/html;
charset=so-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content=text/html;charset=iso-8859-1>
<STYLE></STYLE>
<META content="MSHTML 6.00.2800.1528" name=GENERATOR></HEAD>
<BODY id=MailContainerBody
style="PADDING-LEFT: 10px; FONT-WEIGHT: normal; FONT-SIZE: 12pt; COLOR:
#000000; BORDER-TOP-STYLE: none; PADDING-TOP: 15px; FONT-STYLE: normal;
FONT-FAMILY: Bookman Old Style; BORDER-RIGHT-STYLE: none; BORDER-LEFT-STYLE:
none; TEXT-DECORATION: none; BORDER-BOTTOM-STYLE: none"
leftMargin=0 topMargin=0 acc_role="text" CanvasTabStop="true"
name="Compose message area"><!--[gte IE 5]><?xml:namespace prefix="v"
/><?xml:namespace prefix="o" /><![endif]-->
<DIV>
<DIV>Duane,</DIV>
<DIV> </DIV>
<DIV>Thanks for the reply. I'm looking at the G parts book,
PC369, that is included on the CD. I also have hard copy of it.
I'm
getting the numbers from page 102, item 6. The 1275R is listed up to
serial# G20277 and the 1290R shows being used after #G20278. My
concern is
the proper front rim considering the Roll-A-Matic front end.</DIV>
<DIV> </DIV>
<DIV>Mitch</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT:
#000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="FONT: 10pt arial"><B>From:</B> <A
title=mailto:jdlarson at comcast.net href="mailto:jdlarson at comcast.net">Duane
Larson</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=mailto:antique-johndeere at lists.antique-tractor.com
href="mailto:antique-johndeere at lists.antique-tractor.com">Antique John
Deere
mailing list</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, April 06, 2006 12:43
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [AJD] front wheels</DIV>
<DIV><BR></DIV>Mitch,<BR>Might you mean JD1274R rims and not
JD1275R?
The JD1274R are a heavy duty <BR>version of the JD1268R used on the A, and
both the 74 and 68 are reversible. <BR>G/GM from (5-12)/41 thru 20277 used
the
JD1261R non reversible wheels, and <BR>these were followed by the
reversible
JD1272R wheels/hubs for a short time <BR>before 1948 - GM20582 has these
rims. They were replaced by the JD1274R <BR>reversible wheels, used
from
about 20278 to end of G production. I guess <BR>the JD1275R would be
a
heavy duty version of the JD1261R wheels. Out of <BR>curiosity,
which
parts book lists the JD1275R wheel for the G?<BR><BR>JD1290R wheels didn't
come into use until the late '50's - on the 20 series <BR>as I recall, and
never came on a G.<BR><BR>Regards,<BR>Duane<BR><BR>----- Original Message
----- <BR>From: "Mitchell Daly" <<A title=mailto:md31043 at msn.com
href="mailto:md31043 at msn.com">md31043 at msn.com</A>><BR>To: "Antique John
Deere mailing list" <BR><<A
title=mailto:antique-johndeere at lists.antique-tractor.com
href="mailto:antique-johndeere at lists.antique-tractor.com">antique-johndeere at lists.antique-tractor.com</A>><BR>Sent:
Wednesday, April 05, 2006 8:28 PM<BR>Subject: [AJD] front
wheels<BR><BR><BR>Duane,<BR>In reading your post to Tommy Wilson about the
proper rims he needs, I <BR>started to think about the front rims for my
GM. Now this GM is a little <BR>strange in that it is a 1946 and has
been equipped with a lot of the later G <BR>parts such as a water pump and
Roll-A-Matic front end. The rims that came <BR>on it are definitely
dished the wrong way and a side comment by a <BR>knowledgeable friend said
that they are A rims. The parts book calls for <BR>the JD1275R rims
by
the serial number, but with the Roll-A-Matic, should I <BR>be going after
the
JD1290R rims? Surprisingly, I have found a set of the <BR>JD1275R
rims.<BR><BR>Mitch Daly<BR><A
title="mailto:md31043 at msn.com<mailto:md31043 at msn.com"
href="mailto:md31043 at msn.com<mailto:md31043 at msn.com">md31043 at msn.com<mailto:md31043 at msn.com</A>><BR>------=extPart_000_00B0_01C658EF.904DBE80<BR>Content-Type:
text/html;<BR>charset=so-8859-1"<BR>Content-Transfer-Encoding:
quoted-printable<BR><BR><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN"><BR><HTML><HEAD><BR><META
http-equiv=Content-Type
content=text/html;charset=iso-8859-1><BR><STYLE></STYLE><BR><BR><META
content="MSHTML 6.00.2800.1528"
name=GENERATOR></HEAD><BR><BODY
id=MailContainerBody<BR>style="PADDING-LEFT: 10px; FONT-WEIGHT: normal;
FONT-SIZE: 12pt; COLOR: <BR>#000000; BORDER-TOP-STYLE: none; PADDING-TOP:
15px; FONT-STYLE: normal; <BR>FONT-FAMILY: Bookman Old Style;
BORDER-RIGHT-STYLE: none; BORDER-LEFT-STYLE: <BR>none; TEXT-DECORATION:
none;
BORDER-BOTTOM-STYLE: none"<BR>leftMargin=0 topMargin=0 acc_role="text"
CanvasTabStop="true"<BR>name="Compose message area"><!--[gte IE
5]><?xml:namespace prefix="v" <BR>/><?xml:namespace prefix="o"
/><![endif]--><BR><DIV>Duane,</DIV><BR><DIV>In
reading your post to Tommy Wilson about the proper rims he needs,
I<BR>started
to think about the front rims for my GM. Now this GM is a
<BR>little<BR>strange in that it is a 1946 and has been equipped with a
lot of
the later G<BR>parts such as a water pump and Roll-A-Matic front
end. The rims that <BR>came<BR>on it are definitely dished the
wrong
way and a side comment by a <BR>knowledgeable<BR>friend said that they are
A
rims. The parts book calls for the JD1275R<BR>rims by the serial
number, but with the Roll-A-Matic, should I be going <BR>after<BR>the
JD1290R
rims? Surprisingly, I have found a set of the
JD1275R<BR>rims.</DIV><BR><DIV> </DIV><BR><DIV>Mitch
Daly</DIV><BR><DIV><A
title=mailto:md31043 at msn.com<BR>href="<A
title='mailto:md31043 at msn.com">md31043 at msn.com</A></DIV></BODY></HTML'
href='mailto:md31043 at msn.com">md31043 at msn.com</A></DIV></BODY></HTML'>mailto:md31043 at msn.com">md31043 at msn.com</A></DIV></BODY></HTML</A>><BR>_______________________________________________<BR>Antique-johndeere
mailing list<BR><A
title=http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
href="http://www.antique-tractor.com/mailman/listinfo/antique-johndeere">http://www.antique-tractor.com/mailman/listinfo/antique-johndeere</A>
<BR><BR><BR>_______________________________________________<BR>Antique-johndeere
mailing list<BR><A
title=http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
href="http://www.antique-tractor.com/mailman/listinfo/antique-johndeere">http://www.antique-tractor.com/mailman/listinfo/antique-johndeere</A><BR></BLOCKQUOTE></DIV></BODY></HTML>
_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
More information about the AT
mailing list