[AT] WD Timing

D. Day ddss at telebeep.com
Tue Apr 4 15:19:48 PDT 2006


Rog, you work with A-C's, any clue where to find this?

Dick


----- Original Message ----- 
From: "D. Day" <ddss at telebeep.com>
To: <at at lists.antique-tractor.com>
Sent: Sunday, April 02, 2006 11:18 PM
Subject: [AT] WD Timing


I've never had to set timing on anything with more than 2 cylinders before
and need some help :)

Can anyone tell me where on the WD flywheel you are supposed to find the
center and firing marks?  I did find an "X" on the front side (not the
clutch side) by removing the sheet metal plate next to the oil pan.  Am I
looking in the right place?  There are several inspection covers, one under
the starter and one on the bottom side, but they appear to be too far away
from the flywheel to see it.  The service manual says that the firing mark
should be visible in the inspection opening when the center mark is
centered.

Thanks,

Dick


_______________________________________________
AT mailing list
Remembering Our Friend Cecil Monson 11-4-2005
http://www.antique-tractor.com/mailman/listinfo/at


__________ NOD32 1.1467 (20060402) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com






More information about the AT mailing list