[AT] Question OT

Richard Fink Sr nancydick at pennswoods.net
Sun Sep 4 16:35:24 PDT 2005


Whew  Jerry i had no idea it would weigh that much. Thanks J 
Parks-Mark-charlie. i have this loaded on my trailer i use to haul my old 
tractors. It has a gross weight of 10,000 lbs so guess i am overloaded but 
it did not haul bad. Don't know how i will lift it off. All i have is a 
case 580 b hoe loader???????????????
R Fink



At 12:24 PM 9/4/2005 -0400, you wrote:
>Mark I like you math better than mine..please delete mine
>
>Jerry NW Ohio
>----- Original Message -----
>From: "Mark Greer" <greerfam at raex.com>
>To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
>Sent: Sunday, September 04, 2005 11:31 AM
>Subject: Re: [AT] Question OT
>
>
> > Since most metal tanks are cylindrical in shape it seems he gave us the
>size
> > as 5ft 6in (diameter) and 25 ft (length). If this is so, then from the
> > 7.5lb/sq.ft figure you gave the tank should weigh as follows:
> > ends - 3.14159x2.75x2.75x7.5=178.187lbs each
> > tubular side wall - 3.14159x5.5x25x7.5=3239.765
> > so the total is approximately 180+180+3240=3600lbs
> > Anyone care to check my math and verify?
> > Mark
> >
> > ----- Original Message -----
> > From: "charlie hill" <chill8 at cox.net>
> > To: "Antique tractor email discussion group"
><at at lists.antique-tractor.com>
> > Sent: Sunday, September 04, 2005 10:29 AM
> > Subject: Re: [AT] Question OT
> >
> >
> > > We need to know how high R.
> > > Give us the length, width and height  and someone  will figure  it out
>for
> > > you.  7 Ga steel sheets weigh 7.5 lbs per SF.
> > >
> > > Charlie
> > >
> > >
> > > ----- Original Message -----
> > > From: "Richard Fink Sr" <nancydick at pennswoods.net>
> > > To: "antique tractor email discussion group"
> > <at at lists.antique-tractor.com>
> > > Sent: Sunday, September 04, 2005 12:07 PM
> > > Subject: [AT] Question OT
> > >
> > >
> > > > Can any one tell me what a tank made out of about 7 gage steel would
> > > > weigh. It is 25 ft long and 5ft 6in across. thanks
> > > > R Fink
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at






More information about the AT mailing list