[AT] Question OT

[Jerry Rhodes]

Mark I like you math better than mine..please delete mine

Jerry NW Ohio
----- Original Message -----
From: "Mark Greer" <greerfam at raex.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Sunday, September 04, 2005 11:31 AM
Subject: Re: [AT] Question OT


> Since most metal tanks are cylindrical in shape it seems he gave us the
size
> as 5ft 6in (diameter) and 25 ft (length). If this is so, then from the
> 7.5lb/sq.ft figure you gave the tank should weigh as follows:
> ends - 3.14159x2.75x2.75x7.5=178.187lbs each
> tubular side wall - 3.14159x5.5x25x7.5=3239.765
> so the total is approximately 180+180+3240=3600lbs
> Anyone care to check my math and verify?
> Mark
>
> ----- Original Message -----
> From: "charlie hill" <chill8 at cox.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Sunday, September 04, 2005 10:29 AM
> Subject: Re: [AT] Question OT
>
>
> > We need to know how high R.
> > Give us the length, width and height  and someone  will figure  it out
for
> > you.  7 Ga steel sheets weigh 7.5 lbs per SF.
> >
> > Charlie
> >
> >
> > ----- Original Message -----
> > From: "Richard Fink Sr" <nancydick at pennswoods.net>
> > To: "antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> > Sent: Sunday, September 04, 2005 12:07 PM
> > Subject: [AT] Question OT
> >
> >
> > > Can any one tell me what a tank made out of about 7 gage steel would
> > > weigh. It is 25 ft long and 5ft 6in across. thanks
> > > R Fink
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>